Advertisement
CONTROL MODULE KEYPAD
The Sentinel Control Module has a 24‐button keypad for use as the programming interface:
This keypad includes numeric buttons 1 – 9 and 0 used for numeric data entry. Also used in
programming and operations are:
ON/YES & OFF/NO Keys
ESC (Escape) Key
ENTER Key
Arrow (Navigation) Keys
CLUSTER / SCHEDULE SELECT
Key
PROGRAM SELECT Key
Also included are four F‐keys are provided on the control module keypad to conveniently perform the
following functions:
F1 Key
‐ Displays the time.
F2 Key
‐ Displays the status of the automatic programs.
F3 Key
‐ Shuts down anything that is running (panic button).
IMPORTANT: The F3 key is not functional while in the Edit mode.
F4 Key
‐ Displays context sensitive help while in the Edit mode.
SENTINEL SATELLITE QUICK REFERENCE
Used for manual operations as well as
entering ON / OFF or YES / NO in
programming.
Used for exiting menus or Edit Mode and
returning to normal operations (default
screen)
Used for functions like entering a selected
submenu or saving information.
Used for navigating in Menus, Submenus,
and Edit Modes, as well an incrementing
values in programming.
This button is used for selecting Clusters
(groups of 4 programs) or schedules (run
days) when programming.
This button is used for selecting the
Program (1‐4) associated with a Clusters
when programming.
Page 2 /8
Advertisement
