Dynamix IP PBX-100 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Dynamix IP PBX-100

User's Manual

Table of Contents

Need help?

Do you have a question about the IP PBX-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dynamix IP PBX-100

Page 1 Dynamix IP PBX-100 User's Manual...
Page 2 Version: ippbxUM. 100 Dynamix IP PBX-100...
Page 3: Table Of Contents
3.3.3 User Account ......................32 3.3.4 Firmware Upload ....................33 3.3.5 Music Upload......................34 3.3.6 Import Setting ......................35 3.3.7 Export Setting ......................35 3.4 Reboot System ____________________________________________________37 4. Application Setting __________________________________________ 38 4.1 Customize Automated Attendant ______________________________________38 4.1.1 Record Greeting .....................38 Dynamix IP PBX-100...
Page 4 1) Example Architecture with One ePBX-1 _________________________________44 Test Case .........................44 Extensions register to IP PBX-100 with number 101 to 106. And Extensions can talk to each other........................45 The cal will be forward to MailBox if the extension 101 is busy or no answer....50 The Trunk (Dynamix DW) can also register to IP PBX-100 (registered number 888) ...51...
Page 5: Сн1. Overview
СН1. Overview The Dynamix IP PBX-100 is the next generation al-in-one IP PBX system for small to medium enterprise. It is also designed to operate on a variety of VoIP applications, such as auto-attendant, voice conference, cal transfer, cal pick up and IP-based communications.
Page 6 Phone set record Greeting ■ Management: Web Browser Management ■ HTTP upgrade firmware and ring back tone file ■ Export/Import configuration ■ Network Interface: 1WAN 1LAN ■ DTMF: in-band, RFC2833, SIP-info ■ Network: Support Fixed IP and DHCP mode Dynamix IP PBX-100...
Page 7: Hardware Overview
NET: Display Network status. If WAN port of IP PBX-100 is under Fixed IP mode, LCD will light on. If WAN port is under DHCP mode, and IP PBX-100 succeeds in getting IP, LED will be flashing. If WAN port is under DHCP mode, and IP PBX-100 fails to get IP, LED will light off.
Page 8: Back Panel
Reset: Network and Login information will return to default values. ■ LAN/WAN: RJ-45 socket, complied with ETHERNET 10/100base-T. The pin-out is as following: PIN 1, 2: Transmit PIN 3, 6: Receive ■ 12V DC: Input AC 100V~240V; output DC12V Dynamix IP PBX-100...
Page 9: Step 1
Open browser and link to default LAN IP address of IP PBX-100 "192.168.123.123". 2.4 Step 4 Login IP PBX-100 with default user lD: "root", and no password. After login IP PBX- 100, user can start to configure basic and essential configurations.
Page 10: Step 5: To Configure Basic And Essential Configurations
2.5 Step 5: To configure basic and essential configurations To make IP PBX-100 work have to make some basic and essential configurations, which including Network, Extension (FXS and IP Phone devices), and Trunk (FXO devices). 2.5.1 Network Configuration Enter Management -> Network to configure WAN and LAN IP.
Page 11: Extension Configuration
2.5.2 Extension Configuration User has to set Extension account for other device to register on IP PBX-100. Enter Configuration -> Extension to configure Extension data. On screen will show 100 sets Extension. User can press Modify to add new Extension or modify configured Extension data.
Page 12: Trunk Configuration
Keypad: User can select Keypad type to be RFC2833, In-band, or SIP-lnfo. The setting should be also match the Keypad setting of Extension device. NAT Traversal: If the Extension is behind NAT but register to IP PBX-100 which is under Public IP, you should enable NAT Traversal otherwise the registration should be fail.
Page 13 After press Modify can input detail setting for Trunk ■ Trunk Number: Assign the number of Trunk. This number is also the register name for Trunk device. ■ Password: Assign the register password for device to register on IP PBX-100. Dynamix IP PBX-100...
Page 14 DTMF: User can select DTMF type to be RFC2833, In-band, or SIP-lnfo. ■ NAT Traversal: If the Extension is behind NAT but register to IP PBX-100 which is under Public IP, you should enable NAT Traversal otherwise the registration should be fail.
Page 15: Ch3. Full Web Configurations
СНЗ. Full Web Configurations After Login IP PBX-100 will see screen as below, and there are four main categories, user can click on each category to extend detail items. ■ Configuration: Include al telephony configuration of IP PBX-100. • IP PBX •...
Page 16 Enter Configuration -> IP PBX to configure PBX data. IP-PBX Realm: Configure Realm of IP PBX-100. This parameter is essential when there is more than one IP PBX-100, and user wants to have inter-case between IP PBX-100s. Pease refer to SIP Trunk configuration.
Page 17 Extension. 3.1.2 Extension User has to set Extension account for other device to register on IP PBX-100. Enter Configuration -> Extension to configure Extension data. On screen will show 100 sets Extension. User can press Modify to add new Extension or modify configured Extension data.
Page 18 NAT Traversal: If the Trunk device is behind a device performing NAT, such as firewall or router, and need to register to IP PBX-100 on public network, then user has to enable this function. Enable NAT Traversal to force IP PBX-100 to ignore the contact information for the Extension and use the address from which the packets are being received.
Page 19 We will implement the SMTP in the next version. • If the IP PBX-100 got a new message, it will send the message to the user by email then delete the message from IP PBX-100 immediately. Press Apply to save configuration, or press Cancel to quit configuration.
Page 20 Trunk Number: Assign the number of Trunk. This number is also the register name for Trunk device. Note: • The Trunk Number can also be a "Trunk ID". In the Routing Table page, you should define the destination of prefix route. When you define the prefix route, Dynamix IP PBX-100...