Advertisement
Using the Toothbrush
Note: Fully charge the toothbrush before first use
(see Charging the Toothbrush).
1.
Apply toothpaste to the bristles of the brush head.
2.
Place the brush head on your teeth and press
turn the toothbrush on.
a. Optionally, continue pressing (within 3 seconds)
to cycle through the 5 brushing modes: White,
Clean, Sensitive, Polish, and Massage.
b. The default brushing mode is "White". However,
when the toothbrush is turned off, it will remember
the previously selected brushing mode.
Note:
• Pressing
brushing mode.
• Pressing
toothbrush.
3.
Proceed to brush your teeth.
4.
The toothbrush will automatically pause at 30-second
intervals to remind you to switch quadrants of your
mouth. After 2 minutes of brushing, the toothbrush
will automatically turn off.
Note:
• To manually turn off the toothbrush at any time,
press and hold
Charging the Toothbrush
When the battery level is low, the charging indicator light
will flash 10 times when the toothbrush is turned off.
1.
Connect the USB charging cable to the charging port
and plug into a powered wall adapter or USB port.
The charging indicator light will turn solid.
Note: If the toothbrush has not been used for a long
time (or during your initial charge), it may take up to 5
minutes for the charging indicator light to turn solid.
2.
When the battery is fully charged, the charging
indicator light will turn off. It takes approximately
2.5 hours to fully charge the toothbrush.
within 3 seconds will change the
after 3 seconds will turn off the
.
8
to
Advertisement
