1. Manuals
  2. Brands
  3. John Greenleaf Manuals
  4. Outdoor Furnishing
  5. 373W
  6. Assembly instructions

John Greenleaf 373W Assembly Instructions

Rustic lodge bench
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 373W and is the answer not in the manual?

Questions and answers

Summary of Contents for John Greenleaf 373W

  • Page 2 373W Rustic Lodge Bench – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. D — Foot — Qty. 2 A — Top — Qty. 1 B — Top Support — Qty. 2 E —...
  • Page 3 373W Rustic Lodge Bench ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, Hammer, 5/32" Drill Bit, Drill, Tape Measure, 1/2" Socket. FIG. 1 FIG. 1A 1) Pound the Tack Glides (J) into the bottom of the Feet (D). Using the 3" Lag Bolts (G) and 5/16" Washers (H), attach a Top Support (B) and Foot (D) to each Leg (C).
  • Page 4 Top Support (B). Tap them lightly to mark the screw locations on the bottom of the Bench Top. Move the leg assembly aside and drill 5/32" pilot holes one inch deep. Put the leg assembly back in place and tighten the screws down firmly. PAGE 4 — 373W...

Table of Contents