1. Manuals
  2. Brands
  3. Victory Manuals
  4. Chippers/Shredders
  5. WC-10H
  6. Operator's manual

Victory WC-10H Operator's Manual

Woodchipper with self-propelled hydraulic infeed system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
WC-10H WOODCHIPPER
With Self-Propelled Hydraulic
Infeed System
VERSION 3.0 - EN 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WC-10H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Victory WC-10H

  • Page 1 Operator's Manual WC-10H WOODCHIPPER With Self-Propelled Hydraulic Infeed System VERSION 3.0 - EN 2023...
  • Page 2 Operator’s Manual Date: Chapters: Description: Version: V1.0 2021 First edition. V2.0 September 2022 Editorial update & Layout update. V3.0 January 2023 The name changed from WC102H to WC-10H Operator’s Manual Victory WC-10H - Page 2 of 64 - Version 3.0...

  • Page 3: Table Of Contents

    Table of contents PREFACE ............................6 Identification .........................6 Introduction...........................6 VICTORY TRACTOR IMPLEMENTS WARRANTY ................7 Warranty Provisions ......................7 Liability ..........................8 INTRODUCTION ..........................8 About This Manual ........................8 Manual Update........................8 Explanation Documentation ....................8 List of Abbreviations ......................8 Safety Warning Messages in this Manual ................9 Intended Users ........................9...
  • Page 4 4.9.1 Driveline Safety Checklist .................... 17 4.10 Not Allowed Use ......................... 19 4.11 Safety Decals and Markings on the WC-10H ..............19 4.12 Calamities ..........................22 ASSEMBLY INSTRUCTIONS ......................22 Assembly Info: ........................22 5.1.1 Determine the PTO Shaft length; shorten it if necessary ........... 25 5.1.2...
  • Page 5 MAIN PARTS OF THE WOODCHIPPER..................54 10.1 Torque Specifications ......................61 FLYWHEEL KNIFE CARE ......................61 11.1 How long will my Woodchipper knives last? ..............61 SPECIFICATIONS, FEATURES, PERFORMANCE ................ 63 Operator’s Manual Victory WC-10H - Page 5 of 64 - Version 3.0...

  • Page 6: Preface

    PREFACE Identification The Victory WC-10H is a robust 3-Point Hitch compact PTO-driven woodchipper with a self- propelled hydraulic auto-infeed system and an impressive 10” x 17” infeed opening. A hinged hydraulically driven infeed hopper moves the wood material to the rotor. The flywheel has four knife blades.

  • Page 7: Victory Tractor Implements Warranty

    This Warranty does not apply to any part or product that, in Victory’s judgment shall have been misused or damaged by an accident or lack of regular maintenance or care or which has been repaired or altered in a way that adversely affects its performance or reliability, or which has been used for a purpose for which the product is not designed.

  • Page 8: Liability

    Victory Tractor Implements can't be held liable for consequential damage (business interruption, product damage, etc.). INTRODUCTION About This Manual This Operator’s manual belongs to the owner of the Victory WC-10H woodchipper. Read this Operator’s Manual before operating the WC-10H • Pay special attention to the safety precautions presented in this manual, as they prevent accidents causing machine damage, human injury, or death.

  • Page 9: Safety Warning Messages In This Manual

    Safety Warning Messages in this Manual Read this manual carefully before using the WC-10H to understand how to use it correctly. ◼ After reading, store the manual in a safe place, easily accessible for everyone working with the machine. ◼...

  • Page 10: Intended Use

    Intended Use The WC-10H is a woodchipper for tree branches max 10” thick and other pruning waste. Unintended Use Unintentional use is any other use than described under 'Intended use.' Intended Operating Conditions ◼ Ambient temperature: 0° to + 40°C.

  • Page 11: Safety Information

    Do not remove the brought warning stickers or markings. ◼ Always clean the machine properly and keep the workplace free of dirt and obstacles. ◼ Always use the equipment in daylight or ensure sufficient artificial lighting. Operator’s Manual Victory WC-10H - Page 11 of 64 - Version 3.0...

  • Page 12: Personal Protective Equipment

    Always use tools that are in a good state of repair. Ensure you know how to use the tools before doing any work. ◼ ONLY use replacement parts from the same brand as the relevant part. Operator’s Manual Victory WC-10H - Page 12 of 64 - Version 3.0...

  • Page 13: Additional Safety Rules For Woodchippers

    When raising and moving implements, watch for wires, trees, etc. Make sure all persons are clear of the working area. ◼ Turning the tractor too tight may cause the implement to ride upon wheels. It can result in injury or equipment damage. Operator’s Manual Victory WC-10H - Page 13 of 64 - Version 3.0...

  • Page 14: More Safety Tips For Safe Operation

    Do not wear loose clothing when working around the woodchipper. Personal injury can occur if someone or something turns the flywheel over while checking the knives or adjusting the cutter bar. The flywheel has enough residual energy to remove fingers easily. Operator’s Manual Victory WC-10H - Page 14 of 64 - Version 3.0...

  • Page 15: Use Safety Lights And Devices

    Comply with state and local laws. ◼ The maximum transport speed for any Victory implement is twenty mph on paved surfaces and ten mph maximum on an unpaved surface. Do not exceed. Never travel at a speed that does not allow adequate control of steering and stopping. Rough terrain requires a slower speed.

  • Page 16: Safety And Health Measures When Using Hydraulic Fluid

    Everyone from the component supplier and the company that manufactures and assembles the machinery to the dealers and, ultimately, the actual user must keep safety in mind to avoid accidents. Operator’s Manual Victory WC-10H - Page 16 of 64 - Version 3.0...

  • Page 17: Driveline Safety Checklist

    The second step in specifying a safe driveline application is eliminating as many hazards as possible. ◼ On a driveline with torque limiting or overrunning devices, specify that this device is positioned at the end of the driveline near the implement. Operator’s Manual Victory WC-10H - Page 17 of 64 - Version 3.0...
  • Page 18 ◼ S205 Power take-off definitions and terminology of farming tractors. ◼ S207 Operating requirements for tractors and power take-off driven equipment implements. ◼ S318 Safety for agricultural equipment. Operator’s Manual Victory WC-10H - Page 18 of 64 - Version 3.0...

  • Page 19: 4.10 Not Allowed Use

    ◼ Keep all safety decals clean and legible. ◼ Replace all damaged or missing decals or labels. To order new ones, call Victory Tractor Implements. ◼ New equipment installed during repair requires safety labels to be affixed to the replaced component as specified.
  • Page 20 • Danger of being caught by rotating parts. WARNING decal WARNING FOR HIGH-PRESSURE HYDRAULIC FLUID. WARNING decal WARNING FOR CUTTING FINGERS. WARNING decal WARNING FOR CUTTING BODY PARTS. Operator’s Manual Victory WC-10H - Page 20 of 64 - Version 3.0...
  • Page 21 CAUTION decal on the infeed hopper KEEP HANDS OUT OF THE HOPPER. DANGER decal on PTO Shaft ROTATING DRIVELINE HAZARD. ATTENTION POINT Decal • Ad grease regularly to the desired nipple. Operator’s Manual Victory WC-10H - Page 21 of 64 - Version 3.0...

  • Page 22: 4.12 Calamities

    ◼ Before starting assembly, clear the area of bystanders, especially children and animals. ◼ Ensure sufficient clearance to access the machine from all sides during assembly. Operator’s Manual Victory WC-10H - Page 22 of 64 - Version 3.0...
  • Page 23 Turn the infeed–hopper table open as shown in the figure and the following figure. ◼ Lock the hinged infeed table to the frame using anchor nuts. Unfolded Infeed table: Operator’s Manual Victory WC-10H - Page 23 of 64 - Version 3.0...
  • Page 24 ◼ Ensure that the correct Hitch pins are mounted for your tractor. Ensure they are secured correctly. ◼ Ensure a PTO protection cover is installed on the tractor. Operator’s Manual Victory WC-10H - Page 24 of 64 - Version 3.0...

  • Page 25: Determine The Pto Shaft Length; Shorten It If Necessary

    If the PTO shaft is too long, measure the dimension (B) between both locking pins. ◼ Calculate distance C and do the following to shorten the PTO shaft: Operator’s Manual Victory WC-10H - Page 25 of 64 - Version 3.0...
  • Page 26 • Ensure that the grease nipples are screwed in tightly. Occasionally, dried paint may cover the end of the fitting on the shaft. Remove this by scraping the paint with a knife before injecting grease into these nipples. Operator’s Manual Victory WC-10H - Page 26 of 64 - Version 3.0...

  • Page 27: Install The Pto Shaft

    Move the drawbar ahead, aside, or remove it if required. ◼ Set the tractor’s 3-Point hitch lift height to keep the PTO shaft from exceeding the maximum allowable length and 15° up or down. Operator’s Manual Victory WC-10H - Page 27 of 64 - Version 3.0...

  • Page 28: Instructions Before Starting The Woodchipper

    Ensure you understand all safety signs on the tractor and the woodchipper. ◼ Adhere to PPE safety regulations as described in both tractor and woodchipper manuals. ◼ Inspect the whole WC-10H and check all vital components, like mounting bolts. Operator’s Manual Victory WC-10H - Page 28 of 64 - Version 3.0...

  • Page 29: Pre-Operation Checklist

    Ensure the hydraulic oil level is correct. Fill the oil reservoir with 8 gallons of hydraulic oil. Do not overfill the tank; there should be a 1" air space at the top. Ensure the machine is lubricated per the schedule outlined in the Maintenance section. Operator’s Manual Victory WC-10H - Page 29 of 64 - Version 3.0...

  • Page 30: Adjusting The Discharge Chute

    Check the condition of the flywheel bearings. Check the condition and clearance of the twig-breaker and the clearance between flywheel knives and stationary counter knife. Adjust or replace as required. Operator’s Manual Victory WC-10H - Page 30 of 64 - Version 3.0...

  • Page 31: Instructions Before Starting The Woodchipper

    Running the material too fast can stall the tractor. The lever requires a little force to move. This is normal, so it will stay in the position you adjust and not change without effort. Operator’s Manual Victory WC-10H - Page 31 of 64 -...
  • Page 32 N O T I CE : • The setup is now complete. You must read and understand all operating instructions before using the chipper. Operator’s Manual Victory WC-10H - Page 32 of 64 - Version 3.0...

  • Page 33: Starting And Stopping The Woodchipper

    Stop the tractor engine. ◼ Search for the cause of the problem. ◼ Fix the problem. ◼ Push the lever in the ‘Up’ position. ◼ Start the woodchipper and resume working. Operator’s Manual Victory WC-10H - Page 33 of 64 - Version 3.0...

  • Page 34: Operation

    OPERATION The features of the WC-10H are described in this Chapter to ensure that you can use it to its full potential. • The operation procedures ensure that every operator uses the WC-10H correctly. • Following these procedures will extend the life of the WC-10H, creating a safe operating environment.

  • Page 35: Human

    An operator prepares and starts the equipment, as described further in this chapter. 6.1.2 Operator Every well-skilled technical person can act as an operator. To safely use the WC-10H, the operator must have the following specific professional knowledge: ◼ General knowledge of industrial safety procedures.

  • Page 36: Emergency Handle And Infeed Control Bracket

    6.1.5 Emergency handle and Infeed control bracket The WC-10H is designed with the following: ◼ An On/Off - Emergency lever (1) for stopping and starting the hydraulic power. ◼ An infeed control bracket (2) around the hopper opening to switch the...

  • Page 37: Preparation Before Operating

    Preparation before wood chipping ◼ Inspect the whole WC-10H visually and check all vital components like hoses and their connections, lines, hoses and wires for damage, kinking, wear or dirt. ◼ Visually inspect the condition of the engine and hydraulic pump system.

  • Page 38: Operating The Wc-10H Woodchipper

    Remove this by scraping the paint with a knife before injecting grease into these nipples. Chipping wood The WC-10H is a flywheel-and-knife type chipper, not a shredder. The knives chip the limbs into the flywheel chamber. The knives must always be sharp to operate appropriately. Dirt, rocks, nails, or other foreign materials will shorten the knife's lifetime.
  • Page 39 Sometimes the blades feel sharp to the fingers but are worn or rounded. You must replace all knife blades. ◼ Hold small diameter branches together in a bundle and feed in simultaneously. Operator’s Manual Victory WC-10H - Page 39 of 64 - Version 3.0...

  • Page 40: Other Activities

    Secure adjusting bolt (2). Replace the drive belt ◼ Untighten the belt to the maximum. ◼ Remove the belt. ◼ Install a new belt. ◼ Adjust the drive belt tension. Operator’s Manual Victory WC-10H - Page 40 of 64 - Version 3.0...

  • Page 41: Cleaning

    Check the condition of the curtain each day before starting. ◼ Replace the curtain if torn, damaged, or missing parts to minimize the chance of material coming out of the feed hopper. Operator’s Manual Victory WC-10H - Page 41 of 64 - Version 3.0...

  • Page 42: Clean, Adjust Or Replace The Flywheel Knives

    STEP 2: Lock the flywheel ◼ Insert and secure the flywheel lock tool to prevent the flywheel from rotating while you are working on the knives. Operator’s Manual Victory WC-10H - Page 42 of 64 - Version 3.0...
  • Page 43 90 degrees, and reinstall the lock pin for the next knife. ◼ Repeat this until all knives are replaced. NOTE: Always use new nuts with a Nylon lock for the knives. Operator’s Manual Victory WC-10H - Page 43 of 64 - Version 3.0...
  • Page 44 DO NOT over-torque the bolts; knife breakage can occur. ◼ Remove the lock pin, rotate the flywheel 180 degrees, and reinstall the lock pin for the second knife. Operator’s Manual Victory WC-10H - Page 44 of 64 - Version 3.0...

  • Page 45: Cleaning The Lower Infeed Roller

    Open the slide at the bottom side, as shown in the figure. ◼ Remove all dirt and wood, and limb waste. ◼ Close the slide and start the tractor’s PTO. Operator’s Manual Victory WC-10H - Page 45 of 64 - Version 3.0...
  • Page 46 Changing the Oil Filter ◼ Remove the hydraulic line from the tank. ◼ Remove three screws that secure the filter assembly. ◼ Remove the filter assembly and replace the oil filter. Operator’s Manual Victory WC-10H - Page 46 of 64 - Version 3.0...

  • Page 47: Maintenance And Repair

    MAINTENANCE AND REPAIR This manual describes periodic maintenance that the owner can do. However, any care that requires special tools or technical experience should be left to Victory's authorized service technicians. Only qualified service personnel can carry out activities other than operating activities.

  • Page 48: Lubrication

    Bearing Lubrication Guide; Based on Environmental Conditions There are many questions when it comes to greasing bearings. All Victory tractor implements are equipped with factory-lubricated bearings so that 33% of the race is full of grease; this allows for operation at all speed ranges. In a clean, dry environment adding more grease to the bearing is not required for at least 500 hours of use.

  • Page 49: Hydraulic Oil Reservoir

    ◼ To avoid skipping certain parts, a good practice is to follow the direction of the oil. Starting at the reservoir. Operator’s Manual Victory WC-10H - Page 49 of 64 - Version 3.0...

  • Page 50: General Troubleshooting

    This section can help the operator when a problem arises. It gives basic guidelines if something on the woodchipper is not working correctly. If the procedures in this section do not solve the problem, the owner should contact the Victory Service department for assistance. Problem:...

  • Page 51: Spare Parts And Wearing Parts

    Order spare parts by referring to the parts list. Always state the correct make, type, and part number when ordering. Order Parts Contact Victory Tractor Implements to order spare parts. When ordering spare parts, you must always have the following information: ◼...

  • Page 52: Wearing Parts

    For the reliable operation of a tool, it is essential that wearing parts are of high quality. It is also helpful that a service organization responds to failure situations and unexpected material needs. Wear parts are permanently excluded from the warranty. Wearing parts for the WC-10H Woodchipper: ◼ Knives set; 4 Flywheel knives 12 ½“, Bed counter knife, including fasteners.

  • Page 53: Transport, Storage, And Environment

    Remove the tarp if covered. ◼ Review and follow the pre-operation checklist. Decommissioning 9.2.1 Decommissioning Requirements ◼ Ensure the machine is clean. ◼ Ensure that all liquid systems are empty. Operator’s Manual Victory WC-10H - Page 53 of 64 - Version 3.0...

  • Page 54: 10 Main Parts Of The Woodchipper

    10 MAIN PARTS OF THE WOODCHIPPER VICTORY WC-10H Main Parts Operator’s Manual Victory WC-10H - Page 54 of 64 - Version 3.0...
  • Page 55 VICTORY WC-10H Exploded View; Frame components VICTORY WC-10H Frame components Part numbers Pos.: Part number: Description: Qty: 102R.01.00.00-2 Support frame 102R.02.02.00 Upper blade box BX92.04.00.00 Bx92r discharge chute 102R.03.00.00 Feeding chute 102R.04.00.00 Extend chute Operator’s Manual Victory WC-10H - Page 55 of 64 -...
  • Page 56 VICTORY WC-10H Exploded View; Chute components VICTORY WC-10H Chute components Part numbers Pos.: Part number / Description Qty: 04.01.00 Cable Butterfly nut M6 Bolt M8x140 Washer M8 05.00 Spring Lock nut Spring washer M8 Washer M6 Bolt M6x25 Bolt M8x30 04.03...
  • Page 57 VICTORY WC-10H Exploded View; Infeed components VICTORY WC-10H Infeed components Part numbers Pos.: Part number / Description: Qty: Main feeding chute 03.07.00 Bolt M12x90 03.05.00 Lock nut 12 03.06.04 03.06.03 Bolt M12x30 Upper roller Bolt M12x45 Motor Bearing P208 Cover...
  • Page 58 VICTORY WC-10H Exploded View; Chipper Frame components VICTORY WC-10H Chipper Frame components Part numbers Pos.: Part number / Description: Qty: Lower part of the main machine Rotor Bolt M16x35 Bearing UCFU210 01.03.00 02.03.00 Operator’s Manual Victory WC-10H - Page 58 of 64 -...
  • Page 59 VICTORY WC-10H Exploded View; Flywheel components VICTORY WC-10H Flywheel components Part numbers Pos.: Part number / Description: Qty: Rotor Knife 12 ½ “ Screw M10x45 Socket Head screw M16x60 Washer M10 Lock nut M10 Lock nut M16 Washer M16 Rotor axle Part 11 Operator’s Manual Victory WC-10H...
  • Page 60 VICTORY WC-10H Exploded View; Infeed Control components VICTORY WC-10H Infeed Control components Part numbers Pos.: Part number /Description: Qty: Extended hopper Lock pin 4-position regulator Bolt M8x35 Bolt M6x30 04.03.01 Lock nut M6 04.06.00 Lock nut M8 04.01.11 Bolt M8x20 Bolt M8x12 04.01.13...

  • Page 61: 10.1 Torque Specifications

    11 FLYWHEEL KNIFE CARE 11.1 How long will my Woodchipper knives last? We get asked this question very often. Victory woodchippers are equipped with knives made from very high-quality tool steel. All woodchipper knives will be dull over time and require sharpening or replacing.
  • Page 62 Treat your woodchipper knives like a chain saw chain or lawnmower's blades. Be conscious of what you feed into the woodchipper, and you will get a lot of work out of a set of knives. Operator’s Manual Victory WC-10H - Page 62 of 64 -...

  • Page 63: 12 Specifications, Features, Performance

    ◼ Removable input chute extension for easy storage. ◼ Hydraulic hoses with Nylon wrap for protection. ◼ 37” flywheel. ◼ Variable Infeed speed. ◼ Heavy-Duty steel shaft bearings. Operator’s Manual Victory WC-10H - Page 63 of 64 - Version 3.0...
  • Page 64 The large opening of the infeed chute allows for reliable and professional wood chipping without concerns. ◼ The compact WC-10H is suitable for your mid-sized tractors between 80-120 hp, utilizing your CAT II; 3-Point Hitch. ◼ High-quality hydraulic motors power the infeed rollers, avoiding wood jams by switching direction and speed.

Table of Contents