Nikon D50 User Manual page 132

Can not measure white balance.
Image can not be selected as
source for preset white balance.
White balance bracketing unavail-
able.
Results for Optimize Image vary
from shot to shot.
Metering can not be changed.
Exposure compensation can not
be used.
Continuous shooting ends unex-
pectedly.
RAW image is not displayed during
playback.
"Tall" (portrait-orientation) photos
are displayed in "wide" (land-
scape) orientation.
Can not delete photo.
Some photos are not displayed
during playback.
Photos are not displayed in moni-
tor after shooting.
Can not change print order.
Can not print pictures via direct
USB connection.
Can not select photo for printing.
Photo is not displayed on TV.
Can not copy photos to computer. Choose correct USB option.
Can not use Nikon Capture 4 Cam-
era Control.
Date of recording is not correct.
122
Problem Solution
Subject is too dark or too bright.
Image was not created with D50.
NEF (Raw) or NEF+JPEG Basic selected for
image quality.
Select Custom and choose setting other than
Auto for Sharpening and Tone Comp.
Autoexposure lock is in effect.
Rotate mode dial to P, S, or A.
• P, S, A, and M modes: lower fl ash.
• Turn bracketing off.
Photo taken at image quality of NEF+JPEG
Basic.
• Select Yes for Rotate Tall.
• Photo was taken with Off selected for Im-
age Rotation.
• Camera orientation was changed while
shutter-release button was pressed in con-
tinuous mode.
• Camera was pointed up or down when
shot was taken.
• Photo is protected: remove protection.
• Memory card is locked.
Select All for Playback Fldr. Note that
Current will automatically be selected
when next photo is taken.
Select On for Image Review.
• Memory card is full: delete photos.
• Memory card is locked.
Set USB to PTP.
Photo is a RAW (NEF) image. Use Picture
Project or Nikon Capture 4 version 4.3 or
later (available separately) to print photo.
Choose correct video mode.
Set USB to PTP.
Set camera clock.
80
81
31
93
76
96
47
37
93
31
84
75
75
75
56
11
84
90
84
11
71
59
69
59
59
71
69