Page 2
Installation Remove the shower head from the shower arm; Connect the filter housing lid (water-in side) to the shower arm. Make sure the filter housing bowl will be on the right side of the shower arm when mounted; Connect shower head to the filter housing lid (water-out side); Connect the filter housing bowl with the filter housing lid, with the unwrapped filter cartridge placed in.
Page 3
If step 1 does not fix the leaking at all, check if the o-ring is still in place. If it is missing, contact Envig customer service. If the O-ring is in place, put on the filter housing lid and tighten it.
Page 4
Flow Rate 2.5 GPM Flow Capacity 8,000 Gallon Contact If you have any problem during purchase or installation, please contact Envig customer service: by phone: 1-919-964-0901 Mon – Fri 8:00AM – 5:00PM (EST). by email: cs@envig.cc 1-Year Limited Product Warranty Product warranty will only be effective after the purchase is registered for warranty through Envig’s website: https://www.envig.cc/pages/warranty.
Page 5
under specified conditions. This limited warranty only applies if the system is installed, used, and maintained in compliance with all instructions and requirements enclosed with the system. The manufacturer or reseller shall assume no liability for the determination of the proper equipment necessary to meet your water quality requirements, and we do not authorize others to assume such obligation on our behalf.
Need help?
Do you have a question about the ChloraClear and is the answer not in the manual?
Questions and answers