Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Envig 400GPD
- Page 1 Envig 400GPD Tankless RO System...
-
Page 2: Installation Instructions
If there are any parts cracked or broken, please do not proceed with the installation and contact Envig by phone: 1-919-998-8772 Mon – Fri 8:00AM – 5:00PM (EST). Identify and get familiar with all components for quick installation. -
Page 3: Parts List
To achieve the optimal performance, it is highly recommended to use the system within the operational parameters. Model 14.8” x 5.3” x 14.4” (376 x 135 x 368 Size 14.5 – 87 psi / 0.1 – 0.4MPa Feed Water Pressure 41 –... -
Page 4: Installation Tips
Installation Tips Connection Diagram How to Connect and Disconnect Tubing to Quick-connect Fitting To connect Push the tubing fully into the fitting until it can’t be pushed further. Note: If the tubing is not fully inserted, it may cause leakage. ... -
Page 5: Installation Steps
the distance of the connection, and possibly leave some extra for future moves of the system. Do not leave too much extra where it can get crimped. Cut the tubing squarely and cleanly with a tube cutter, sharp utility knife or scissors. - Page 6 Step 2: Install the RO Faucet Note: If there is no hole in your kitchen sink or countertop, you have to drill one with the right size. Professional service is highly recommended. For DIY, please follow the recommendations as below. Choose a diamond core bit for granite, or a carbide drill bit for stainless steel.
- Page 7 45 minutes. The water then is ready for drinking. TOC, COD and TDS should be reduced for up to 99% after the first 15 minutes flushing. For system functioning verification, Envig TOC meter (https://www.amazon.com/gp/product/B08HNJLMP4) is recommended.
-
Page 8: Section 1: Working Mode Display
Operation Manual Display Section 1: Working Mode Display The filter indicators are solid white. When making water, the working indicator is flashing white. The working indicator is solid white when the system stops making water. The wireless indicator is for future features, and is not currently used and should be ignored. -
Page 9: System Maintenance
Insert the filter into the filter housing, align the turning knob horizontally in the direction of the unlock sign. Twist the filter with a little force forward in the clockwise direction for 90 degrees, until the turning knob is aligned vertically with the filter sign. -
Page 10: Limited Product Warranty
Check the system and water pipe fittings regularly for water leakage to avoid any water damage; Check regularly on the power supply and whether wires are loose or damaged to avoid electric accident. If you are using well water as the source, please ensure the feed water has been through a pre-filtration system. - Page 11 including, but not limited to, any warranties of fitness or merchantability, except as expressly set forth above. In case some states do not allow limitations on how long an implied warranty lasts, you may choose to return the system. If you choose to keep it, you agree that the above limitations shall apply to you.
- Page 12 Thanks for your business...
Need help?
Do you have a question about the 400GPD and is the answer not in the manual?
Questions and answers