Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for EasyBraid EB-9000S
- Page 1 USER MANUAL EB-9000S CURIE HEAT TECHNOLOGY SOLDERING/REWORK STATION 9.24.10...
-
Page 2: Table Of Contents
TABLE OF CONTENTS EB-9000S SPECIFICATIONS PAGE 3 INTRODUCTION PAGE 4 SYSTEM FEATURES PAGE 5 HANDPIECE FEATURES PAGE 7 WORKSTAND FEATURES PAGE 8 UNPACKING/ASSEMBLY/OPERATION PAGE 9 TIP CARTRIDGE REPLACEMENT/MAINTENANCE PAGE 10 ORDERING GUIDE PAGE 11 WARRANTY AND SERVICE PAGE 12... -
Page 3: Eb-9000S Specifications
EB-9000S SPECIFICATIONS Input Line Voltage: EB-9000S 100-110 VAC Tip to Ground Potential: <2mV, true RMS 50-500Hz Tip to Ground Resistance: <2 Ohms DC Idle temperature Stability: +/- 1.1 C (2 Ambient Operating Temperature: 10-40 C (50 F -104 Maximum Enclosure Temperature:... -
Page 4: Introduction
INTRODUCTION Congratulations on your purchase of the EB-9000S soldering/rework station. This unit has been tested and inspected by Easy Braid prior to shipment, and with proper maintenance will give you years of reliable performance. A complete EB-9000S station consists of: •... -
Page 5: System Features
SYSTEM FEATURES Power Supply: The EB-9000S power supply is manufactured from the finest materials and is the most compact 13.56MHz power supply available on the market today. It includes: • LCD display with built in power indicator and tip cartridge status •... - Page 6 Power Supply LCD Mode Start up Working Mode Ready Mode Handpiece not connected Error Codes are factory set. If a malfunction occurs, contact your local distributor.
-
Page 7: Handpiece Features
HAND-PIECE FEATURES The unique EBSHP-1 hand piece is comfortable to use, lightweight and well balanced. The clever handle design incorporates an aluminium front section, with either gray or green grips and an ESD safe, nylon rear that minimizes heat transfer and ensures operator comfort. Complete Handpiece assembly including cartridge removal pad To change grip, unscrew the front retaining cap and slide off the old grip. -
Page 8: Workstand Features
WORKSTAND FEATURES The EBSHH-1 work stand is manufactured from durable phenolic material; the unique “surelock ” iron holder has an open design that will keep the handpiece stable and cool when in use. “Surelock” open design Brass Tip Cleaning curl Tip Cartridge holder Sulphide free... -
Page 9: Unpacking/Assembly/Operation
UNPACKING/ASSEMBLY/OPERATION Please read this manual and follow the directions before using the equipment. The carton contains: 1. Instruction manual 2. EB-9000PS power supply 3. EBSHH-1 Soldering handpiece holder, including Brass curls and sponge 4. EBSHP-1 Soldering handpiece, with green and gray grips, 5. -
Page 10: Tip Cartridge Replacement/Maintenance
TIP CARTRIDGE REPLACEMENT/MAINTENANCE Tip Cartridge replacement Easy Braid tip cartridges are very easy to install and remove; make sure that you turn off the power supply first. A simple “pull action” will disengage the tip from its connector. When reinserting a new tip, the cleverly designed inner shaft of the handpiece will self-center the tip in order to ensure quick and easy assembly. -
Page 11: Ordering Guide
ORDERING GUIDE EB-9000S CURIE HEAT TECHNOLOGY SOLDERING SYSTEM EASY BRAID 100-110V SYSTEM PART NUMBER EB-9000S POWER HANDPIECE WORKSTAND SUPPLY CARTRIDGE EB-9000PS EBSHP-1 EBSHH-1 EBM8CH176... -
Page 12: Warranty And Service
WARRANTY All equipment and accessories are warranted by Easy Braid to be free from defects in materials and workmanship as follows: Part Number Description Warranty Period EB-9000PS 100-110V Power supply 4 Years EBSHP-1 Handpiece 90 Days EBSHH-1 Workstand 90 Days This warranty does not apply to equipment or goods which have been tampered with, misused, damaged through improper installation or used in a manner contrary to supplier instructions.
Need help?
Do you have a question about the EB-9000S and is the answer not in the manual?
Questions and answers