Care & Cleaning; Electrical Specifications - HOMCOM 800-140V80 Assembly Instruction Manual

Hints
Use fresh ingredients.
Don't cut food too small. Fill the width of the large feed tube fairly full. This prevents the
food from slipping sideways during processing. Alternatively use the small feed tube.
When using the chipper disc, place ingredients horizontally.
When slicing or shredding : food placed upright
ⓖ
horizontally .
There will always be a small amount of waste on the plate or in the bowl after processing.
Care & cleaning
1.Always switch off and unplug before cleaning.
2.Handle the blades and cutting discs with care - they are extremely sharp.
3.Some foods may discolour the plastic. This is perfectly normal and won't harm the
plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove
the discoloration.
Power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
Liquidizer
1.Empty the jug/jar before unscrewing it from the blade unit.
2.Wash the jug/jar by hand.
3.Remove and wash the seals.
4.Don't touch the sharp blades, brush them clean using hot soapy water, then rinse
5.thoroughly under the tap. Don't immerse the blade unit in water.
Leave to dry upside down.
All other parts
Wash by hand, then dry.
Alternatively they can be washed on the top rack of your dishwasher. A short low
temperature programme is recommended.
Electrical Specifications
Max Voltage
120V
Frequency Max Wattage
60Hz 500W
ⓕ
comes out shorter than food placed