Jasco enbrighten WFD7109 - Wi-Fi Smart LED Filament Bulb Quick Start

Table of Contents

Contents

1 Light pairing modes
2 Download the app
3 Set up account
4 Install the smart device
5 Voice control
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Light pairing modes

Flashing quickly – auto pairing
Flashing slowly – manual pairing

Remotely operate your smart bulb with the easy-to-use Enbrighten app. Follow the available instructions and resources to set up your smart device.

Scan the QR code above or search Enbrighten on the Apple App Store or on Google Play

Set up account

Create an account in the Enbrighten app
Add devices, control the smart bulb from anywhere and create schedules:

Install the smart device

Turn OFF power at the switch before installation
Install the smart device

Screw in the smart bulb to a standard indoor light fixture
Power switch for the lamp or light fixture must be ON

Voice control

Compatible with Amazon Alexa and Google Assistant:
Voice control
Follow the steps in the Amazon Alexa or Google Assistant app to connect the Enbrighten app or select "Support" in the Enbrighten app.

Thank you for your purchase!

Instructions made easy
Read instructions or watch easy-to-follow video.
Scan code or visit byjasco.com/51344i

For deals, to register your purchase and to tell us how we're doing, simply scan the code or visit byjasco.com/deals

Home automation is in your palm with Wi-Fi smart devices and accessories.

Like our product? Leave a review on your favorite retailer website or amazon.com

Having problems? Let us know how we can help. Call 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

NOT FOR EMERGENCY LIGHTING
RISK OF ELECTRIC SHOCK. DO NOT USE IF OUTER LAMP ENVELOPE IS BROKEN OR DAMAGED
RISK OF FIRE
RISK OF BURNS
DO NOT USE WHERE DIRECTLY EXPOSED TO WATER
DO NOT USE WITH STANDARD DIMMERS
THIS LAMP WILL NOT OPERATE PROPERLY WHEN CONNECTED TO A STANDARD (INCANDESCENT) DIMMER OR DIMMING CONTROL
NOT FOR USE IN TOTALLY ENCLOSED LUMINARIES
DO NOT USE WITH MEDICAL AND LIFE-SUPPORT INSTRUMENTS

FCC Declaration of Conformity is available on the support page in the Enbrighten app.
App Store is a service mark of Apple Inc. Google and Google Play are trademarks of Google LLC. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 5-year limited warranty. Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F, Central Time.

This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit deffetent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.