Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our company reserves the right to change and explain the design of the product.
Safety and Maintenance Safety and Maintenance 1.Important Safety Warnings 4. Safety Precautions ·Do not allow children to touch any movable part of this product. ·Check whether voltage is consistent with the specification of this product. ·Use the well-grounded power supply unit suitable for this product. ·Never insert or pull out the plug with a wet hand.
Safety Warning Safety Warning Warning Warning When the legrest of the massage chair is lifted, nobody should apply pressure on Do not remove or pull out the remote controller cable or the power cord in the the legrest to prevent the massage chair from falling forward which will damage this standby or power-on state to avoid any damage to this product or accidental electric product or result in personal injuries.
Safety Warning Name of Components Warning When adjusting the footrest retractable function or when footrest is declining, please be sure not to put hard objects (such as keys, mobile phones, Etc.) or put the hand into the gap of the footrest, and the intersection with the armrest; To avoid product damage or personal injury caused during the process.
Function Function ·This product is designed with a set of massage chair manipulators that can move ·The right armrest is provided with on/off key, linkage adjustment key, pause/run up and down, drive four wheels and operate in mute mode. button, AUTO key, voice control and wake-up button, heat treatment key, air ·There are five simulative massage techniques: Shiatsu, Kneading, Tapping, pressure key, Legrest up/down key, zero gravity key.
Introduction to the Remote Controller Introduction to the Remote Controller 1.Display: ·TFT color LCD showing the massage functions in the running state. 2.Switch: ·Turn on or off the massage. 3.AUTO key: ·Enter the automatic function mode selection interface. For more information about the functions, refer to Page 16 of the Operation Instructions.
Method of Usage Method of Usage I. Turn on the power supply of this product Shoulder position adjustment ·After detecting the shoulder position, the buzzer will beep. If there is any difference from the actual shoulder position, adjust it to the appropriate position by pressing the "UP"...
Page 9
Method of Usage Method of Usage 3.Pause button Auto program 30:00 Shoulder position 30:00 ·While the massage function is in service, press "Pause" button to temporarily stop 00:00 all the massage functions; press "Pause" button again to continue the massage Easy massage>...
Page 10
Method of Usage Method of Usage 1) Automatic program (main menu - Auto program) Full body Deep massage to rejuvenate your body. ·Press "Menu Button" to enter the main menu interface. Press "Up Key" or "Down massage Key" to select the automatic programs. Press "OK" (or press “Auto”button on the Chiropractic Focus on spine massage and fully relieve the fatigue and pain from hand controller.) to enter the selection of automatic programs.
Page 11
Method of Usage Method of Usage 2) Manual function (main menu - manual function) 3) Other functions (main menu key - other functions) ·Press "Menu Button" to enter the main menu interface. Press "Up Key" or "Down ·Press the "Menu key" to enter the main menu interface, press the "Up key" or "Down key"...
Page 12
Method of Usage Method of Usage 02) Other functions - airbag massage for the lower body 04) Other functions - calf kneading ·Lower body air pressure: including leg air pressure and foot air pressure. ·Calf kneading: Turn on or off the calf rub function. ·...
Page 13
Method of Usage Method of Usage MainMenu 19:59 Memory Use 19:59 Auto program Manual Mode MemoryUse MemoryUse Other functions MemorySave MemorySave Customise Cancel Cancel Angleadjustment Setting Select the object with ▲▼ and press OK Select the object with ▲▼ and press OK 01) Customise -Memory save or cancel 5) Angle adjustment (main menu - angle adjustment) ·After entering the memory save interface, press the"Up key"...
Page 14
Method of Usage Method of Usage 01) Angle adjustment - whole body angle 03) Angle adjustment - back angle ·Whole body angle adjustment: Adjust the angle of the backrest frame and the small ·Back angle adjustment: Adjust the backrest frame to lie down. leg frame at the same time.
Page 15
Method of Usage Method of Usage 6) Setting(Main menu-Setting) 02) Settings - Bluetooth ·Press the "Menu button" to enter the main menu interface, press the "Up key" or ·Bluetooth setting (this function is disabled by default): After enabling the Bluetooth "Down key"...
Page 16
Method of Usage Method of Usage 04) Equipment ID Function Description ·Equipment ID: Display the current device ID number. ·Enter the settings interface. Press "Up Key" or "Down Key" to select the equipment Back massage speed 5 speed levels adjustable ID and check the equipment number of the current device.
Page 17
Method of Usage Method of Usage III. Introduction to Armrest Shortcut Keys Button Description Zero-gravity Key: Once it is pressed, the positions of the leg rest and the backrest can be automatically adjusted to the positions for zero gravity.There are three zero-gravity modes and the lying OFF mode, which can be switched.
Page 18
Method of Usage Method of Usage IV. Voice Control Instruction Description Function ·When the massage chair is turned on or in standby mode, the sound "Hi Alice" or "Hey Power button: Short press this button to pause the operation; if it is Alice"will be produced to enable the voice control function.
Page 19
Method of Usage Method of Usage V. Operation Instructions for Bluetooth Speaker Play ·Next, flip the leg rest cover over to cover the round tubes on either side of the leg 1.Enter the smart device main menu. Open "Settings" and select the "Bluetooth" rest (Picture 3).
Legal notices Method of Usage IX. Floor Protection FCC Information · The prolonged heavy pressure on the massage chair may cause scratches on the · Any changes or modifications not expressly approved by the party responsible for floor. Thus, put a carpet or cushion on the floor where the massage chair is placed compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the A306-48 and is the answer not in the manual?
Questions and answers