Subscribe to Our Youtube Channel
Summary of Contents for TAG Heuer POCKET PRO
- Page 1 POCKET PRO HL400-C CIRCUIT User Manual Version 09/2015 TAGHeuer Timing Page 1 / 20...
-
Page 2: Table Of Contents
3.1. Qualification (mode A) 3.2. Lap Time (Mode B) 3.3. Multi Count Down (mode C) Recommendations Download a new version of Firmware Technical specification 6.1. Pocket Pro characteristics 6.2. USB Connector Quick Guide Note TAGHeuer Timing Page 2 / 20... -
Page 3: Concept
Concept The Pocket Pro Circuit App, Pocket Pro HL400-C, gives users access to timekeeping functions dedicated to the timing of motor sports / race tracks. The innovative and bespoke application makes it possible to time training sessions for circuit events with individual starts and finishes (qualifying), lap time with best lap and gap plus 3 individual count down programmes up to 39 hours).All times are memorised and can... -
Page 4: Standard Timing Mode
TIME 2.2.2. Power The Pocket Pro functions with an internal battery. It can be recharged when it is connected to a PC (USB cable) or by a (USB – 5VDC) power supply When not used for 36hours, the Pocket Pro will switch OFF automatically (LCD OFF) To wake up the Pocket Pro, just press any button. -
Page 5: Time Memory
2.2.3. Time Memory The Pocket Pro has a memory of 800 times. The number of memorized times is shown on the 3 digits (Memory status) When the memory reaches 90% capacity (720 times), the 3 digits will flash. Warning Once the memory is full (800 times), the next time recorded will be stored... -
Page 6: Date Mode
2.3. Date Mode This mode allows you to change the date of the Pocket Pro. To set the date: Press the MEMORY button: the first digit will flash and icon is ON Press the SPLIT/LAP button to change the value... -
Page 7: Stopwatch Mode
2.4. STOPWATCH mode This timing mode allows the timekeeper to make a Start/Finish, with split time (SPLIT) and lap time (LAP) with 1/100th second precision Number of split / Memory status Running status Split time Lap Time Running time The time displayed is up to 59’59.99’’ (1 hour) SPLIT Split time, or cumulative time (SPLIT/LAP... -
Page 8: Count Down Mode (Cd)
Single Count-Down to Auto-Restart Count-down (loop mode) icon on the LCD will switch In this Auto-Restart Count-Down, during the last 5 seconds, the Pocket Pro will sound a single short beep and a then long beep at 00:00... -
Page 9: Time Mode
SPLIT/LAP START/STOP buttons simultaneously The time of day of the Pocket Pro will be displayed on the top of the LCD with 1 minute in advance The synchro will be automatic at the end of the full minute 2.6.3. To Synchronise at Zero... -
Page 10: Timing
2.6.4. Timing Once the Synchronization is made, the icon appears To memorize the time of day, press the SPLIT/LAP button The time on the LCD will stay and the passing counter (top-left) is increased To see the time of the day running, press the MEMORY button TAGHeuer Timing... -
Page 11: Specific Circuit Timing Modes
Specific Circuit Timing Modes In the Pocket Pro Circuit, 3 specifics modes are available for all races on circuit (Auto / Moto) A: Qualification Up to 25 competitors and 30 lap times for each Each competitor has to be timed individually Display the net time, gap with best time, and time to beat. - Page 12 Button Start/Stop: Start competitor / Lap Time Button Split/Lap: Change competitor (press and hold button for 5 sec) Button Memory: Allows you to view the best time of each competitor. Button Mode: Allows you to view the competitor number being timed (press and hold button) Example for competitor n°...
-
Page 13: Lap Time (Mode B)
3.2. Lap Time (Mode B) This mode allows you to time laps of a competitor and view result with the Best Lap and its Gap Sequence Number of competitor / Memory status Battery / Mode Setting / Running status Timing Mode Running Time / Lap Time (mm.ss.dc) Gap with the best lap (mm.ss.dc) Best Lap (mm.ss.dc) -
Page 14: Multi Count Down (Mode C)
3.3. Multi Count Down (mode C) This mode allows you to define up to 5 different count down settings up to 36 hours Battery / Mode Setting / Running status Timing Mode N° of the count down (n° 4) Time configured for the count down n°4 (12:00 hours) Button Start/Stop: Start Count Down Button Split/Lap:... -
Page 15: Recommendations
It is very important and recommended to keep the rubber in place at all times when not using the USB connection. The optimal visibility of LCD is when the Pocket Pro is protected from direct sunlight The Pocket Pro can overheat in excessive direct sunlight. -
Page 16: Technical Specification
Technical specification 6.1. Pocket Pro characteristics Power 5 VDC (rechargeable with USB cable) Internal battery 600mAh / 3.7V Autonomy 35 days (in use) after full charge Shell Aluminium – PVD surface treatment Weight 160 g Precision +/- 2 sec / month... -
Page 17: Quick Guide
Quick Guide Reset memory Buttons: Start/Stop + Memory Change mode: Clear Memory (Start/Stop + Memory) Button: Mode Power off Buttons: Memory + Mode (hold down together for 5 seconds) Recall recorded times Button: Memory Setting (Date / Time / CD) Button: Memory to select the digit Button: Split/Lap to change value Button: Mode to validate the selection... - Page 18 Mode A Button: Start/Stop: Start / Lap Time Button: Split/Lap: (5 sec) Change competitor number Button: Memory: recall / view memorized time Button: Mode: view the competitor n° Mode B Button: Start/Stop: Start, Button: Split/Lap : Lap Button: Split/Lap (5 sec): Press and Hold the button 5 sec: Lap number increments and previous lap is deleted Button: Memory: recall / view memorized time Mode C...
-
Page 19: Note
Note TAGHeuer Timing Page 19 / 20... - Page 20 TAG Heuer PROFESSIONAL TIMING 6A Louis-Joseph Chevrolet 2300 la Chaux-de-Fonds Switzerland Tel : 032 919 8000 Fax : 032 919 9026 E-mail: info@tagheuer-timing.com http: //www.tagheuer-timing.com TAGHeuer Timing Page 20 / 20...
Need help?
Do you have a question about the POCKET PRO and is the answer not in the manual?
Questions and answers