Summary of Contents for niu A4 Max
- Page 1 A4 Installation Manual A4 Max Installation Manual A4 Max 安装手册 文件编号 File No ： IM-A4MAX 版本 Version ： 2021 V3 日期 Date ： 2021.06.16 www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 2 The connector is considered to be in compliance with UL 6703 only when assembled in the manner specified by assembly instructions. NIU Power will be exempted from any warranty if A4 connector was assembled or disassembled without following the User Manual.
- Page 3 污染等级 Pollution degree IP68（1m，1h） ， mated 防 护等 级 Degree of Protection IP2X，unmated 阻燃等级 Flame class UL94-V0 3. 产品选型表 Product Selection Form A4 Max Series:A4 Max 系列光伏铜线连接器型号表 Connector Male Housing Connector Female Housing Male Terminal Female Terminal 连接器负极本体选型表 连接器正极本体选型表 负极导电体选型表...
- Page 4 4. 连接器结构及外观尺寸图 Connector Size Drawing 4.1正极连接器 Positive Connector Housing 型号列表 TYPE list： A4-F6，A4-F7，A4-F8，A4-F10 4.2 负极连接器 Negative Connector Housing 型号列表 TYPE List with NEC lock（1型Type1）: A4-M6，A4-M7，A4-M8，A4-M10 型号列表 TYPE List without NEC lock（2型 Type2）: A4-M6-2，A4-M7-2，A4-M8-2，A4-M10-2 www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 5 A4 Installation Manual 4.2 连接器 U 型端子尺寸 Type U Terminals 5. 组装 Assembled by machine 5.1 剥线 Stripping 剥线尺寸Stripping size：6±0.5mm 5.2 铆接 Crimping /12AWG 上 刀 尺 寸 Tool Size(Up) www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 6 A4 Installation Manual /12AWG 下 刀 尺 寸 Tool Size(Down) 典型电缆 铆接高度 铆接宽度 Cable Spec Crimping (H) REF Crimping (W) REF 2.1±0.1mm 4.1±0.1mm www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 7 A4 max-10 8.0≤OD≤10.0 mm gap by screw torque. 装配好后需要检查负极pin 针与负极本体的同轴度。要求圆心距≤1mm。 After assembled, check the coaxiality of the negative pin and the negative body. Requirements of the center distance ≤ 1mm. www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 8 上边Top S2546 中间 Middle 4.0mm 12AWG 下边 Bottom 6.0mm 10AWG 6.1.2 铆接钳 Crimping Tool 料号 P/N 钳口 Jaw 铆接范围 Crimping Range 2.5mm 14AWG 上边Top A2546 4.0mm 中间 Middle 12AWG 下边 Bottom 6.0mm 10AWG www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 9 6.1.4 工具箱 Tool Box 料号 数量 图片 Qty. Picture Tools 1 set 组装步骤 Assembly Steps （1） 剥 线 Stripping 剥离电缆绝缘层。Strip the insulating layer of cable.L=6±0.5mm. 注意不要切断绝缘层下的线芯。Be attention and not to cut off the wire core. www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 10 The cable tension after crimping is referenced to the following table. All copper wires should be bandaged 线缆规格 拔出力 Cable specifications Cable pull-out force 4.0mm / 12AWG ≥312N 6.0mm / 10AWG ≥356N 10.0mm / 8AWG ≥401N 16.0mm / 6AWG ≥450N www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 11 注意 1：拧螺帽时，需保证电缆线与螺帽同心。 Remark1：Ensure the concentricity of cable and cable gland when screw cable gland. 注意 2：须确认负极 pin 针和负极本体同轴，再锁紧螺帽。 Remark2：Make sure the negative pin and the negative body are coaxial and then lock the nut. www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 12 线缆接线 Connection of Cable 电缆根部建议保留 20mm 未折弯长度，以免因线缆折弯产生的外力引起连接器密封件变形。 In order to avoid the cable bend force lead to a visible deformation in the sealing portion of the insulation, the cable need keep at least 20mm straight length. www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 13 散件包装 Spare Parts Packing 一般每纸箱（590*390*200mm）自封袋装500个正极连接器，自封袋装 500个负极连接器。500 个插针和 500 个插套各装一小塑料袋。 Generally, there are 500 pcs positive connector housing, 500 pcs negative connector housing, 500 pcs male terminals and the 500 pcs female terminals in one box. www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 14 油 性 封 孔Oil sealing agent 不兼容 Incompatible 乙酸乙酯 Ethyl acetate 不兼容 Incompatible 备注：对于上表未列明的化学品，需经确认无影响后再使用。 Note: Chemicals which is not contained in the table should only be used after confirm it has no influence to the product. www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 15 Connector in the process of outdoor installation and use, if not to connect in time, please do a good job in the connector protection, put on the dust cap and protect the connector from water, dust and www.niu-power.com Marketing@niu-power.com A4 MAX Manual 2021 V3...
- Page 16 11. 小牛的连接器必须与小牛指定的连接器，进行正、负极对插。 Connectors of NIU Power brand must be connected with connectors appointed by NIU Power. 此免责条款最终解释权归小牛电器（苏州）有限公司。 This disclaimer final explanation right belongs to the Niu Power (Suzhou) Corporation.