Related Manuals for TH COMMUNICATIONS MZ11D7
Summary of Contents for TH COMMUNICATIONS MZ11D7
- Page 1 MZ11D7 DOOR ACCESS CONTROLLER QUICK START GUIDE MANUAL MICRO ID SDN BHD Manual Rev 1.1 TH COMMUNICATION SDN BHD www.thcomm.com.my info@thcomm.com.my...
- Page 2 USER LIST Card No. Name. Card No. Name. Manual Rev 1.1...
- Page 3 Operation Instruction Restore to factory default settings Step 1: Switch “Off” power than Switch “On” Power (or Press Reset Button at Controller) Step 2: Press “0” Step 3: Press “Enter” Step 4: Press “888” Step 5: Press “Esc” Note: only restore the program password and parameter settings, the authorized cards will not be deleted Enter Programming mode Step 1: Press “Enter”...
- Page 4 c. Key “2”: Add Card By Keypad 0. Read Card : (Auto save location) Step 1: Enter programming mode Step 2: Press “2” Step 3: Press “0” Step 4: Enter 5 digit card number. Step 5: Press “Enter” Step 6: Repeat step 4, 5 if got more cards Step 7: Press “Esc”...
- Page 5 3. Delete All : Step 1: Enter programming mode Step 2: Press “3” Step 3: Press “3” Step 4: Press “999” Step 5: Wait for 1min to delete all cards. Note: The back light of the keypad “3,6,9,enter” will be off. Key “4”: Lock Release Mode 0.
- Page 6 Key “7”: Door Open Mode (Card or Pin – Default) Step 1: Enter programming mode Step 2: Press “7” Step 3: Press “0” Step 4: Press “Enter” (Card + Pin) Step 1: Enter programming mode Step 2: Press “7” Step 3: Press “1” Step 4: Press “Enter”...
- Page 7 Access Method: Card or Pin - Batch card at the keypad (or) Press ‘ ESC ’ < 4-digit Pin Number > Card and Pin - Batch card at the keypad (and) - 4-digit Pin Number Common Pin Access method - Press (*) - Enter 4-digit Common Number Note:...
Need help?
Do you have a question about the MZ11D7 and is the answer not in the manual?
Questions and answers