KT INDUSTRIES EXCALIBER 31-5015 Instruction Manual

®
USER'S MANUAL
WARNING
Do not use the torch in windy or very dry conditions in which the torch flame or amount of material
burning may be difficult to control.
In some locations you may not be permitted to burn without a permit. Contact your local authorities
and fire department about state and local codes or permit requirements before using the torch.
When operating the torch always have a helper with proper NFPA approved fire extinguisher (or other
fire fighting apparatus of a type and size appropriate for the application and trained in its use nearby
to watch and control the burning material.
Only use this equipment outside or in large areas with enough ventilation to avoid the build up of
smoke, fumes and gases. If the air is not clear and free of smoke, fumes and gases, stop using the torch
and move the work outside or improve the ventilation.
Propane fumes may collect in an unventilated or enclosed area causing an explosive atmosphere or
one in which you cannot safely breathe.
Never use the torch on materials, coatings, solvents or chemicals which release toxic fumes when
heated or on plants such as poison ivy or poison oak.
Always wear eye protection, heavy gloves, leather shoes and heavy cotton clothing treated to be fire
retardant. Do not wear shorts or loose clothing.
Always direct flame from the torch away from your body when torch is lit. Never point the torch at
yourself or other persons while lighting or operating. Keep other persons away from torch at all times.
WARNING: This product, when used for flame processes, produces fumes or gases which contain
chemicals known to the State of California to cause birth defects, and in some cases, cancer.
Wash hands after use. (California, Health & Safety code S 2549.5 et seg.)
PRODUCT WARRANTY
The manufacturer's sole obligation under this warranty is limited to making replacement or repairs
within warranty period of purchase. This warranty does not cover product malfunctions or damages
resulting from product tampering, misuse or abuse. Please follow the operating instructions carefully to
maintain this warranty. Failure to do so will void the warranty. The manufacturer shall also not be held
liable for any indirect or consequential damages arising out of the use of this product.
A copy of the original receipt are required as proof of purchase. Please carefully maintain this warranty.
This warranty is non-transferable and extends only to the original buyer purchasing the products directly
from the manufacturer or through its authorized distributors, dealers, or agents.
K-T Industries, Inc. • 3112 NW Boulevard • Sheldon, IA 51201
www.ktindustries.net
USER'S MANUAL
EXCALIBER
Torch Valve
10' Hose With
POL Safety Valve
Familiarize yourself with the operation of the torch before lighting and
operating the torch. DANGER!
the odor of LP gas. Shut off the torch at once and check all connections
with soapy water for leaks. Do not operate the torch until all leaks are
stopped. Do not use any type of oil as a rust inhibitor. Direct the torch
only at objects you wish to ignite and burn. Provide fire extinguishing
materials nearby in case of an unplanned burn. Do not leave a lighted
torch unattended. Do not lay a lighted torch on the ground. Exercise
caution on windy days since burning debris can be blown to non-burn
areas. Keep the torch flame away from the cylinder, hose and valve
connections. Do not attempt to modify the torch assembly. Do not use
cylinders without vapor withdrawal valves. Do not use non-approved
fuels. LP Gas only.
!
Warning: Read and understand all instructions before using!
Severe personal injury could occur if the user fails to follow the
aforementioned warnings, and /or fails to follow the operating
instructions.
Model No. 31-5015
500,000 BTU
MUL-T-TORCH
Flint Striker
Comfort First-
Torch Handle ,
®
Wand and Head
Do not operate the torch if you smell
®