Page 1
IMPORTANT! READ CAREFULLY AND KEEP THIS USER’S MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE! INSTRUCTION MANUAL FOR HIGH CHAIR „VISION 360” This high chair has been manufactured in accordance with the requirements of Directive 2001/95/EC of the European Parliament and of the Council and complies with European Standard EN 14988 Children’s...
Page 2
ATTENTION! YOUR CHILD WILL BE MOST SECURE IF YOU FOLLOW THE INSTRUCTIONS AND RECOMMENDATIONS GIVEN IN THIS USER’S MANUAL! CAUTION! NEVER LEAVE YOUR CHILD UNATTENDED! WARNING! THIS PRODUCT IS SUITABLE FOR CHILDREN, WHO CAN SIT ALONE UNAIDED, AGED UP TO 3 YEARS AND WEIGHING NO MORE THAN 15 KG. ...
Page 3
MAIN FEATURES High chair is suitable for one child, who can sit alone unaided High chair is suitable for one child aged up to 3 years and weighing not more than 15 kg. 3-point safety harness system ...
Page 4
ASSEMBLY INSTRUCTIONS. FUNCTIONS ATTENTION! Follow exactly the instructions given and the order for assembly and usage, described in texts and pictures. You will not need any tools for the assembly. ATTENTION! CHECK THE STABILITY OF FIXING AFTER EACH OPERATION! 1. ASSEMBLY OF SUPPORTING (UPPER) TUBES TO THE FOOT RESTS AND SEAT 1-1 – Position the footrest with the ribbed part up. 1-2 – Insert the upper tube through the hole, as shown (fig. 1-1). Press and hold the pin and then insert the tube in the hole. WARNING! THE UPPER TUBE MUST NOT BE FIXED TO THE FOOTREST BEFORE THE SEAT IS INSTALLED! (the pin should not click in the small hole inside the footrest, in order to allow the movement of the tube up and down).
6. INSTALLING THE FOD TRAY 6-1 – Pull out the two levers under the tray. 6-2 – Insert the tray in the seat and release the levers until it is fixed. ATTENTION! Make sure the tray is fixed by trying to pull it out form the seat. 6-3 – The tray may be adjusted in 2 positions (forward and backward). Pull the two levers and move the tray in desired position, then release until the tray is fixed. The top tray can be removed for easy cleaning. 7.
Page 6
Correct angle for inserting the tubes “click” “click” Storage basket rod Opening...
CARE AND MAINTENANCE Clean the fabrics, plastic parts and metal parts with damp cotton cloth or sponge and mild soap. Do not use abrasive, bleach or other aggressive detergents. Always after cleaning leave the high chair fully dry and after that use it or store it. It may appear mold to your high chair if you keep it moist.
Need help?
Do you have a question about the VISION 360 and is the answer not in the manual?
Questions and answers