BorMann BSR3001 Assembly Instructions Manual page 3

EN
Assembly instructions:
Use small rubber mallet to tap the parts together this will avoid damage to the powder coated finish.
Assemble the horizontal parts with the broad edge upwards.
When assembling ensure the tags of the selves are fully inserted and into the uprights and that the tags are
inside the uprights
Bend the inner support cross members tags are bent around to secure them in place using a flat screwdriver.
Once assembled the shelf must be place on a horizontal, smooth floor. If the floor is not smooth and flat this will
affect the stability
of the shelf and the maximum load-bearing capacity.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes signif-
icantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also
concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
3
INCORRECT
WWW.BORMANNTOOLS.COM
Tags Pointing
Downwards
CORRECT