Element One FOLD! 173 FullHD Installation And Operating Instructions Manual

Advertisement

Installation and Operating Instructions (EN)
FOLD! 173 FullHD
FOLD! 173 4K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FOLD! 173 FullHD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Element One FOLD! 173 FullHD

  • Page 1 Installation and Operating Instructions (EN) FOLD! 173 FullHD FOLD! 173 4K...
  • Page 2 Installation and Operating Instructions FOLD! (EN) Explanation of symbols Important Information Caution © ELEMENT ONE Multimedia GmbH...
  • Page 3 In this manual we have endeavored to provide you with all the necessary information to enable you to have most success with the products. Ralf Küchel Technical Manager / CTO © ELEMENT ONE Multimedia GmbH...
  • Page 4: Table Of Contents

    Dimensions ................................... 6 Safety Instructions ............................... 7 Installation ................................... 8 Commissioning ................................10 General Information .............................. 10 FOLD! 173 FullHD | FOLD! 173 4K .......................... 11 Operation ................................... 12 General Information .............................. 12 Raising ..................................12 Display Tilt ................................13 Retracting ................................
  • Page 5: Commissioning Date

    Installation and Operating Instructions FOLD! (EN) Commissioning Date Date: Serial No.: Keep this document for future reference. Pass on this document when you pass on the device. Notes © ELEMENT ONE Multimedia GmbH...
  • Page 6 Installation and Operating Instructions FOLD! (EN) Scope of Supply FOLD! 173 FullHD | FOLD! 173 4K • HDMI cable • • Table power supply - Input: 100-240V AC, 50 / 60Hz. 1.5A; Output: 12V 60W MAX 5.A (Cable length DC ~ 140cm) •...
  • Page 7: Description

    2x stepper motors 12V and precise mechanics • • Connector for remote control 9-pin d-sub and RJ45 • Electronic clamping protection plus mechanical protection in case of maloperation Manual extension function "DirectAxleAccess" for service, maintenance, installation • © ELEMENT ONE Multimedia GmbH...
  • Page 8: Dimensions

    Installation and Operating Instructions FOLD! (EN) Dimensions © ELEMENT ONE Multimedia GmbH...
  • Page 9: Safety Instructions

    Do not load the device with more than 1.0 kg when closed. Do not cover the switched-on display for a longer period of time. Excessive temperatures due to blocked heat emission can lead to defects or a reduced lifetime.. © ELEMENT ONE Multimedia GmbH...
  • Page 10: Installation

    Attach the display protectors • ELEMENT ONE devices are fixed in the furniture by means of the decorative/holding frame. The integrated grub screws are intended for horizontal alignment in the furniture. Please note that these may only be applied lightly (risk of damage to the furniture or...
  • Page 11 Attach the two supplied undermount clamps to achieve sufficient stability and to secure the monitor against tilting when extended. Alternatively, suitable own solutions can be attached to the table for secure mounting. © ELEMENT ONE Multimedia GmbH...
  • Page 12: Commissioning

    Maintain distances to mounting points and structural elements • Cables must not touch any components during opening and closing • All edges are chamfered or rounded in the area of the cables. Strong light can affect the image quality. © ELEMENT ONE Multimedia GmbH...
  • Page 13: Fold! 173 Fullhd | Fold! 173 4K

    Connect the DC-adaptor cable to the socket on the housing. Connect AC plug of the power supply unit to the mains supply. Connection for remote operation (9pol dSub, optional The use of the original ELEMENT ONE cable remote control or connection cable is recommended) Connection touchscreen (USB, optional Maximum length of the cable used 1.80m, included...
  • Page 14: Operation

    Press the button A on the right-hand side of the frame – the display will then rise out. Whilst the monitor is being electrically raised, the procedure can be interrupted in any position by briefly pressing the button B. © ELEMENT ONE Multimedia GmbH...
  • Page 15: Display Tilt

    Steps (3) and (4) must be carried out within 30 seconds or, otherwise, programming mode will be cancelled. Retracting Press the button B and the display will automatically retract. Whilst the monitor is being electrically retracted, the procedure can be interrupted in any position by briefly pressing the button A. © ELEMENT ONE Multimedia GmbH...
  • Page 16: Service Function Direct Axle Access (Daa)

    Access is located on the lower right and left sides of the housing. You need a slotted screwdriver or a cordless screwdriver to operate it. When using the DIRECT AXLE ACCESS (DAA), follow the same safety instructions as for regular extension and retraction (see Operating, General) © ELEMENT ONE Multimedia GmbH...
  • Page 17: Care Instructions

    = Important Information = Caution = Ban Disconnect the power supply plug before cleaning work! To clean the device, use only cloths moistened with water or detergent. Do not use abrasive cleaners, alcohol, thinners or similar chemicals. © ELEMENT ONE Multimedia GmbH...
  • Page 18: Display Setting With Osd Buttons

    = display is switched off green = normal function flashing green = standby mode or signal out of range orange = no signal oder fail safe Mode flashing orange = no signal red = input format is not supported © ELEMENT ONE Multimedia GmbH...
  • Page 19: Tcp/Ip - Control And Status Request

    Unit response always OK, even if already permanently blocked lock perm off Cancels permanent blocking Unit response always OK, even if not blocked of push button control © ELEMENT ONE Multimedia GmbH...
  • Page 20: Control Via A Media Control System With 9-Pin D-Sub Remote Interface

    • an appropriately configured PC / notebook Detailed information is available on request on the firmware update procedure, the system requirements for the PC/laptop used and how to obtain the special hardware and software required. © ELEMENT ONE Multimedia GmbH...
  • Page 21: Technical Specification

    240V AC, 50 / 60Hz. 1.5A; Output: 12V 60W max 240V AC, 50 / 60Hz. 1.5A; Output: 12V 60W max 5.A (cable length DC ~ 140cm) power cable 1.5m 5.A (cable length DC ~ 140cm) power cable 1.5m © ELEMENT ONE Multimedia GmbH...
  • Page 22: Safety Standards

    FOLD! comply with the regulations 2006/42/EG, 2006/95/EG, 2004/ 108/EG Harmonized standards applied: EN ISO 12000:2010 EN 60950-1+A1:2010 EN 55022:2010 EN 55024:2010 EN 61000-3-2/A1/ A2:2009 EN 61000-3-3:2008 Kuppenheim, 01.02.2021 Ralf Küchel Technical Manager / CTO © ELEMENT ONE Multimedia GmbH...
  • Page 23: Warranty

    Installation and Operating Instructions FOLD! (EN) Warranty (1) The warranty for ELEMENT ONE products is as follows from the date of purchase - 60 months on all purely mechanical components, and - 24 months on all electrical and electronic components.
  • Page 24 WEEE-Rg.Nr.: DE69117530 ELEMENT ONE Multimedia GmbH Zum Murgdamm 5 DE-76456 Kuppenheim Service-Hotline: +49 (0)7222 96654-15 service@element-one.de Version: 06/2022 Misprints, errors and technical changes reserved © ELEMENT ONE Multimedia GmbH...

This manual is also suitable for:

Fold! 173 4k

Table of Contents