ADT Smart Home IQ4 User Manual page 4

USING YOUR SYSTEM: EMERGENCY PANIC
Emergency Panic
If you have a police, fire, or medical emergency and your system is not armed or a sensor has not been triggered, you
can send a manual emergency panic by touching the icon in the bottom right corner and selecting the type of
emergency you are experiencing. (Note: If your system is a Keyholder response only monitoring package this option
will not be available.)
To send a police or emergency panic
without sounding the siren, using the
"Silent Alarm" at the bottom of the screen
Alarm Types
Police: When touched it triggers the "Police"
siren pattern and sends a police emergency
signal to your provider's monitoring station.
Available of police response systems only.
Fire: When touched it triggers the "Fire" siren
pattern and sends a fire emergency signal to
your provider's monitoring station. Available
with ADT monitored smoke and heat detectors.
Emergency: When touched it triggers the
"Emergency" siren pattern and sends an
emergency signal to your provider's monitoring
station.
X
Canceling an Emergency Panic
To cancel an emergency panic, touch the
Cancel
"cancel" button and enter a valid user code.