Page 1
FORTE CART FTE-CART WARNING: Over-tightening of screws and bolts will damage the station and cause metal frame to bend. Back of cart WARNING: Cord does not extend. Do not pull. To connect plug into wall socket, use an extension cord.
Page 2
CONTENTS B. Stainless Steel Medical Tray 1 pcs A. Ink Holder 1 pcs C. Screws M6x16 4 pcs Washer φ6X13X1 4 pcs D1. Rinse Cup Holder 1 pcs M5 Allen Wrench 1 pcs E. Screws M6x12 2 pcs D2. Power Supply Holder 1 pcs Screw caps 2 pcs G.
Page 3
Use the M3 Allen Wrench remove screw before used. G:M3 Allen Wrench screw Page 3/6...
Page 4
D2:Power Supply Holder Step 2 : Place removable stainless steel Step 1 : Ink Holder can be hooked over medical tray into recessed area of Forte the back of the Forte Cart for stability. Cart top. 3、4( use screws C Step 3、4 :Using M5 Allen wrench, Screws, and Washers (C) ,...
Page 5
Paper towel holder and glove box holder can be mounted on either side of the cart. Simply remove the middle drawer, remove screws mounting the holders, and remount in the desired side. Paper Towel Glove Holder Holder Exterior of cart Interior of cart Step5: Attach glove box holder by screwing 2 screws with spacers into the pre-drilled holes.
Page 6
US SOCKET : HOW TO RESET THE FUSE Down To remove the drawer: 1.Empty drawer of its contents 2.Apply pressure to hinge upwards / downwards respectively 3.Pull drawer out slowly When the surge protector trips, the switch will switch to the off position. Sockets are no longer powered.