Do you have a question about the Port-A-Blaster ZPB140 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Zephyr Port-A-Blaster ZPB140
Page 1
Coil Cleaning Made Easy Model: #ZPB140 #ZPB140...
Page 2
Troubleshooting Cause Action Problem Pump Doesn’t Run. Make sure you have Check Power Supply. Coil Cleaning Made Easy 120V Power. Temperature is Too Low. Check Power Switch Increase Temperature. Contents: Low Pressure. Clean Inlet Filter / Screen Inlet Filter Screen or Hose is Plugged.
Page 3
Description & Application Pump The Port-A-Blaster pressure washer is designed to clean air conditioning and refrigeration coils. It is designed with a low pressure setting for indoor evaporator coils and a high pressure setting for outdoor condenser coils. It is lightweight, ruggedly built, reliable, self-priming and easy to use Trigger Sprayer with and carry.
Page 4
Warnings Operating Instructions (continued) Warning 7. Turn Power on and choose “INDOOR” (low pressure) or “OUTDOOR” (high Pressure). Squeeze trigger to activate pump. Pump will discharge Always disconnect power before making any adjustments air as it primes. or service to the machine. Do not operate in the vicinity of Warning Do Not Run Port-A-Blaster without water or cleaning...
Need help?
Do you have a question about the Port-A-Blaster ZPB140 and is the answer not in the manual?
Questions and answers