What's in the box?
(1) Starlight Room Projector
(1) USB Power Cable
Power the Starlight Room Projector
The Starlight Room Projector offers 2 options for power:
• USB power cable
• 3 AA batteries (not included)
To use the USB power cable:
Plug the USB power cable into
the POWER 5V jack on the back
of the Starlight Room Projector.
Plug the other end of the USB
power cable into a USB power
source, like a computer or
charging adapter.
To use batteries: Use a Philips-head
screwdriver (not included) to unlatch
the battery door on the bottom of
the Starlight Room Projector.
Remove the battery door and insert
3 AA batteries (not included) into
the battery compartment. (Match
the polarity signs on the inside of the
compartment!)
Place the battery door back on
the bottom of the Starlight Room
Projector. Screw the battery door latch back into place to
Starlight Room
lock the door.
Projector, back
IMPORTANT: NEVER place the Starlight Room Projector or
cords of any kind inside the crib. NEVER place the Starlight
Room Projector or cords within reach of children. THIS IS
NOT A TOY.
Everyday use
Starlight Room
Projector, bottom
PLAYING SOUNDS
The Starlight Room Projector offers a variety of soothing
lullabies and nature sounds, as well as white noise.
To turn the Starlight Room
Projector on: Press the
Battery door
icon on the top of the
Door latch screw
Starlight Room Projector.
To play the lullabies: With the Starlight Room Projector
turned on, press
selects a different lullaby.
To play the nature sounds: With the Starlight Room
Projector turned on, press
sounds. Each press selects a different nature sound.
To adjust the volume: Press and hold the
volume will eventually go to its lowest level. Stop pressing,
then press and hold again to increase the volume.
To turn lullabies or nature sounds off: Press and hold the
(for lullabies) or
Starlight Room Projector, top
to turn on the built-in lullabies. Each press
to turn on the built-in nature
icon. The
(for nature sounds) icon.