Assembly
Two people are recommended for assembly.
CAUTION:
1
Attaching the casters
□
Attach the Rigid casters (E) and Swivel casters (F) to the
Bottom tray (B) on the preferred side by inserting 16 pcs
Bolts (AA) through Bottom tray (B).
□
Tighten securely with 16 pcs Washers (CC) and Nuts (BB).
B
E
3
Installing the Drawer Body
□
With 2 people, gently lower the Drawer body (A) in
between the Upright supports (C) to rest on the Middle
beams (G) and Pry bar holders (H & I).
□ Ensure the Upright supports (C) are resting under the
top lip of the Drawer body (A) and the attachment holes
are properly aligned.
BB
CC
F
AA
2
Attaching upright supports, beams
and pry bar holders
□
Be sure the Swivel casters (F) are locked.
□
Attach Upright supports (C) to Bottom tray (B), using
16 pcs Bolts (AA), and tighen with 16 pcs Washers (CC)
and Nuts (BB).
□
Attach Beams (G) to the middle position of the Upright
supports (C) at front and rear, using 4 pcs Bolts (AA),
and tighen with 4 pcs Washers (CC) and Nuts (BB).
□
Attach Pry bar holders (H & I) to the middle position
of the Upright supports (C) at left and right side, using
4 pcs Bolts (AA) and tighen with 4 pcs Washers (CC) and
Nuts (BB).
□
Square up unit and tighten securely.
I
AA
B
I
5
Please contact 1-866-441-5080 for further assistance.
BB
CC
H
G
A
C
H
G
C