QNect QN-IPC04 - Wi-Fi Smart Outdoor Camera Manual

Description

1. Lens
2. IR
3. Speaker
4. Micro-SD card slot [Max 128Gb]
5. Reset
6. Microphone
7. Status light

Camera LED

RED rapidly flashing: in connection mode
BLUE constant: Connected
BLUE flashing: Searching connection

Before you start

• Read the manual carefully before use. Keep the manual for future reference.
• Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
• The functionality of WiFi connected product depends on the stablity of your home network. We are not responsible for the stability and capability of your private network, and therefore the optimal functionality of our products. If any questions about your private WiFi network, contact your WiFi providor.
• We are continuously improving and updating our products and product information. It's therefore possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear, always check our website for the most current manual version.

Use

1. Download and install the app "qnect home" from Apple App Store or Google Play Store on your mobile device.
   
   
   
2. Launch the app "qnect home".
3. Create a new account or log in to your existing account.
4. Tap "+" to add the device.
5. Select Security > QN-IPC04 from the list of products.
   Optional : Insert a memory card into the memory card slot.
6. Connect the power adapter to the device. Insert the mains plug of the power adapter into the wall socket
   • If the camera does not make a "beep" sound and the red LED is not flashing fast: press the reset button for about 6s until your hear a beep sound.
   • If the camera makes a beep sound and the red LED is flashing fast: Confirm in the app.
7. Confrm the Wi-Fi network and password. Tap Continue and a QR-code will appear.
8. Hold your phone with a 15 – 20 cm distance in front of the camera. If the camera has detected the QR-code, you will hear a sound.
9. Confirm you heard a beep and enter the device name.
   Note: The device name will also be used for push notifications and will also be visible in your Google Home or Amazon account.
10. Install the device on your desired location using the installation manual.

Safety

• To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
• Disconnect the product from the mains and other equipment if a problem should occur.
• Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
• Regarding the rights of individuals to take photos and videos, or register sounds, the law for the protection of personal data, we accept no liability for the illegal use of the equipment. Please check your national rights before recording images.

• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
• Clean the outside of the device using a soft, damp cloth.

Support

• If you need additional help, visit www.qnecthome.com