McLED ML-910.101.22.0 - Wi-fi Router Manual

To ensure that your product serves you well and long time, please read this manual carefully prior to installing it.

Product data

Overview

The convertor works with RF receiver series to be controlled by IOS or Android system via WiFi.

Wiring diagram

Method 1: Connect your cell phone with your home net router (WiFi-RF)

Method 2: Connect your cell phone with the convertor (WiFi -RF)

Safety & Warnings

• DO NOT install with power applied to device
• DO NOT expose the device to moisture

Operation

1. Download application from 'app store' or 'google play' by searching 'easylighting' or scanning following QR codes.
2. If the convertor has connected with router, then connect your cell phone to your router network. If the convertor did not connect with router, then connect your cell phone to the convertor network directly.
   (Password: 0123456789)
3. Open the easylighting application and operate according the application manual.
4. LED WiFi Router can be controlled by only one mobile phone.

*When the lifetime of this product will run out, please hand it in to the places for electro-waste.

www.mcled.eu