Advertisement
To improve wearing experience, please select the best fit eartips to use.
It is recommended to try Medium eartips as it's suitable for most people. The factory assembled earbuds are equipped with Medium eartips.
Please use the best fit eartips. The better the air tightness, the better the sound insulation and sound quality.
Notes:
Take out the earbuds from charging case, the earbuds will power on and pair to each other automatically. Then the left earbud indicator turns off and the earbuds enter into pairing mode. Activate your phone's BT and search for "abramtek E3" and select. After initial setup, the earbuds will automatically reconnect to the last paired device.
Note: If the earbuds do not work properly, please put the earbuds into charging case for 2-3 seconds and then try again.
Support switch between left and right earbuds. You may listen to music with single left earbud or right earbud, with no need to repeat the pairing process.
Put the earbuds into the charging compartment and make sure it fits the charging port contact receiver properly. When the earbuds are fully charged, the white indicator will turn off.
Insert USB-C cable to recharge the battery case. When the battery case is being charged, the white indicator turns on. When the battery case is fully charged, 4 white indicators light up.
Take out the earbuds from charging case, the earbuds will power on automatically (White indicator flash 3 times, and then orange indicator light once).
Take out earbuds
Put the earbuds into the charging case, the earbuds will power off automatically (Orange indicator always on)
Indicator:
Orange Light: Charging
White Light: In-Use/Connected
Answer Phone Calls
When a phone call comes in, tap the right earbud twice (time interval 0.6s) and this will answer the call. After you finish your conversation, tap the right earbuds twice to hang up phone.
Reject Phone Calls
When a phone call comes in, tap the right earbud 3 times (time interval 0.6s) to reject the call.
Play/Pause
When playing music, tap the right earbud twice (time interval 0.6s) to pause and play the music.
Previous Track/Next Track
When playing music, tap the left earbud 3 times (time interval 0.6s) to switch to the previous track, tap the right earbud 3 times to switch to the next track.
Voice Interaction
In standby mode, tap the left earbud twice (time interval 0.6s) to activate your phone's voice assistant (for example, Siri).
Model: E3
Bluetooth Version: 5.0
Bluetooth Distance: 10 meters in open area
Charging Time: 3 hours
Standby Time: 150 hours
Playback Time: Over 6 hours
Battery: Polymer li-ion battery
Support Protocol: HFP/HSP/A2DP/AVRCP
Earbuds Battery Capacity: 3.7V 60mAh
Charging Case Battery Capacity: 3.7V 1200mAh
Charging Case Input: 5V 800mA
(All technological information is subject to practical performance)
Limited Warranty
ShenZhen Abramtek Technology Co., Ltd.
Add: 5th Floor, Building 1, Yonghongfeng Industrial Park,
Baiyunshan Village, Dalang Street, Longhua Town,
Shenzhen, China 518109
Website: www.abramtek.com
Email: support@abramtek.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the E3 that isn't answered in the manual? Leave your question here.