Creative T50 WIRELESS MF1665 - Signature Series Quick Start

Also See for Signature T50 WIRELESS:

Quick start manual (2 pages)

Table of Contents

Contents

1 Product Overview
2 Connecting with NFC
3 Enjoy audio from Bluetooth devices
4 Reset to default setting
5 Documents / Resources
- 5.1 Download manual

Creative T50 WIRELESS MF1665 - Signature Series Quick Start

Product Overview

Product Overview
warning Object And Liquid Entry
Never push any object through the openings, as this can result in a fire, electric shock or damage. Do not spill liquid on the product.
*Optional (Sold Separately)

Right speaker
Left speaker
Power ON/Standby and LED status indicator
Bluetooth LED status indicator / Bluetooth
Connect Button (A multi function button that performs various Bluetooth pairing / connecting activities)
Volume control
Treble level control
Bass level control
Headphone out
To analog audio source
Connection to Left speaker
To Power adapter
NFC receptor

Connecting with NFC

2 simple steps to connect to your speaker
Note: Remember to turn on NFC on your mobile device before connecting via NFC to the Creative T50 wireless
(When the speaker is off)
Connecting with NFC - When the speaker is off

(When the speaker is on)
Connecting with NFC - When the speaker is on

Enjoy audio from Bluetooth devices

Power on the speaker and the LED Status
Indicator will show white.
Press and Hold the Bluetooth Connect button for 3 sec, then release when the Bluetooth LED Status Indicator is flashing in white.
1. Turn ON the Bluetooth feature on your device.
2. Search for Creative T50 Wireless.
3. Pair and connect to Creative T50 Wireless.
  If prompted for passcode, enter 0000.
4. Pairing successful, ready to stream music.
  Note: The above are generic steps to pair to a Bluetooth device, for more specific instructions on Bluetooth connectivity for your device, please consult your manufacturer's manual.

Did you know?
You can re-connect to the last connected device by either

Pressing the Bluetooth Connect button once when it is turned ON
Initiate a connection from your Bluetooth device while the speaker is on and not connected to any Bluetooth devices

Reset to default setting

You can return the Creative T50 Wireless to default settings and erase its memory of paired devices by following these steps

Action	Indicators	Status
Press and hold the Bluetooth Connect button for 8 seconds while the speaker is ON	A voice prompt is heard and the LED status indicator is blinking in white	Memory cleared. Speaker is in pairing mode. Ready to accept connections from other Bluetooth devices.