Chapter 5 - Console-Based Management; Connecting A Console Cable To Your Netopia D-Series; Connecting Through A Telnet Session; Navigating Through The Console Screens - Netopia D3232 User Reference Manual

Console-based management is a menu-driven interface for the capabilities built in to the Netopia D-Series.
Console-based management provides access to a wide variety of features that the Netopia D-Series supports.
You can customize these features for your individual setup. This chapter describes how to access the
console-based management screens.
This section covers the following topics:
"Connecting a console cable to your Netopia D-Series" on page 5-36
"Connecting through a Telnet session" on page 5-37
"Navigating through the console screens" on page 5-38
Console-based management screens contain five entry points to the Netopia D-Series configuration and
monitoring features. The entry points are displayed in the Main Menu shown below:
Return/Enter for WAN Line configuration.
You always start from this main screen.
Note: Although it references the Netopia D3232, this screen applies to all Netopia D-Series DSL DSUs.
The WAN Configuration menu displays and permit changing the following options:
Clock Source: Network or Internal
Bridge Mode Filter Set: Basic Firewall or NetBIOS Filter
Remove Filter Set
The System Configuration menus display and permit changing:
Management IP Setup. See
Netopia D3232 v4.6
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick View...
"Management IP setup" on page
Console-Based Management 5-35
6-42.