Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BERKSHIRE HATHAWAY Marmon Foodservice Technilogies SILVER KING SKRCB97H-EDUS1
Summary of Contents for BERKSHIRE HATHAWAY Marmon Foodservice Technilogies SILVER KING SKRCB97H-EDUS1
- Page 1 Technical Manual Replacement Parts List Refrigerated Chef Base MODEL: SKRCB97H-EDUS1 SKRCB97H-EDUK1 Marmon Foodservice Technologies 355 Kehoe Blvd., Carol Stream, IL 60188 Contact: (800) 328-3329 Silverking.com FORM NO. 46926 REV B 06/2022 Specifications Subject to Change Without Notice.
- Page 2 TECHNICAL MANUAL SILVER KING REFRIGERATED CHEF BASE MODEL SKRCB97H-EDUS1 Thank you for purchasing Silver King food service equipment. Our goal is to provide our customers with the most reliable equipment in the industry today. Please read this manual and the accompanying warranty information before operating your new Silver King unit.
-
Page 3: Different Types Of Alerts
Different Types of Alerts: DANGER: Indicates an immediate hazardous situation which if not avoided WILL result in serious injury, death or equipment damage. WARNING: Indicates a potentially hazardous situation which, if not avoided, COULD result in serious injury, death, or equipment damage. CAUTION: Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury or equipment damage. - Page 4 SAFETY PRECAUTIONS (Continued): WARNING - Do not use electrical appliances inside the food/ice storage compartments unless they are of the type recommended by the manufacturer. WARNING - Appliances and their surroundings shall not attain excessive temperatures in normal use. WARNING - Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
-
Page 5: Installation
INSTALLATION The stainless steel exterior of the cabinet has been protected by a plastic covering during manufacturing and shipping. This covering can be readily stripped before installation. After removing this covering, wash the interior and exterior surfaces using a warm, mild soapy water solution and a sponge or soft cloth. - Page 6 R290 R PECIALIZED RECAUTIONS AND UIDELINES FOR ERVICING NITS SING EFRIGERANT: Qualification of Service Personnel/Workers: Required qualification of working personnel for maintenance, service and repair operations. Every working procedure that affects safety means shall only be carried out by competent persons. Examples for such working procedures are: ·...
- Page 7 Checks to the Refrigeration Equipment: Where electrical components are being changed, they shall be fit for the purpose and to the correct specification. At all times the manufacturer’s maintenance and service guidelines shall be followed. If in doubt, consult the manufacturer’s technical department for assistance.
- Page 8 Cabling: Check that cabling will not be subject to wear, corrosion, excessive pressure, vibration, sharp edges or any other adverse physical or environmental effects. The check shall also take into account the effects of aging or continual vibration from sources such as compressors or fans.
-
Page 9: Charging Procedures
Charging Procedures: In addition to conventional charging procedures, the following requirements shall be followed. WARNING: Ensure that contamination of different refrigerants does not occur when using charging equipment. Hoses or lines shall be as short as possible to minimize the amount of refrigerant contained in them. WARNING: Cylinders shall be kept in an appropriate position according to the instructions. -
Page 10: Operation
Electrical Connections Be sure to check the data plate, located on the liner of the cabinet, for required voltage prior to connecting the unit to a power source. The specifications on the data plate supersede any future discussion. The standard unit is equipped with a seven (7) foot power cord that requires a properly grounded electrical receptacle. The power cord comes with a 3 prong plug for grounding purposes. - Page 12 REPLACEMENT PARTS LIST – SKRCB97H-E ITEM NO. PART DESCRIPTION PART NO. DRAWER ASSEMBLY COMPLETE (2 PAN DRAWER) 46652 DRAWER HANDLE SS (2 PAN DRAWER) 10451-10 DRAWER GASKET (2 PAN DRAWER) 10310-55 CABINET SLIDE MEMBER RH CABINET SLIDE MEMBER LH KIT 10451-08 (1 DRAWER) DRAWER SLIDE ROLLER MEMBER RH DRAWER SLIDE ROLLER MEMBER LH...
- Page 14 Thermistor Field Testing Use the guide below to test if a thermistor (temperature probe) is functioning properly. See the replacement parts list for part number information. Table 2 is valid for all thermistors listed on table 1. Establish Thermistor Temperature Table 2 ...
- Page 15 SILVER KING WARRANTY – LEGACY PRODUCT LINE Silver King warrants to the original purchaser of every new Silver King Legacy refrigerated self-contained unit (as defined below), that the Equipment shall be free from defects in material and workmanship under normal use and service as outlined in the Technical Manual for a period of one (1) year from the later of either (a) the date of shipment from the manufacturer or (b) the date of installation (the “Warranty Period”), but in no event shall the Warranty Period commence later than six (6) months from the date of shipment from the manufacturer...
- Page 16 that it will replace the drawer slides with one of similar design and capacity, exclusive of delivery and installation charges, if it is found in Silver King’s review to be inefficient or inoperative due to defects in material or factory workmanship.
-
Page 17: Product Ordering Information
PRODUCT ORDERING INFORMATION Call us toll-free at 1-800-328-3329 or 1-763-923-2441. Fax us at 1-763-553-1209. Visit www.silverking.com stocking distributor, equipment specs, and current price list for your area. SERVICE / PARTS ORDERING INFORMATION Call us toll free at 1-800-328-3329. Select prompt 1 for Equipment Service and Tech Support or prompt 2 for Parts.
Need help?
Do you have a question about the Marmon Foodservice Technilogies SILVER KING SKRCB97H-EDUS1 and is the answer not in the manual?
Questions and answers