Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Boya BY-WXLR8 Pro
- Page 1 BY-WXLR8 Pro Plug-on Transmitter...
- Page 2 1) The power LED glows blue when the unit is on. 2) The power LED of transmitter glows red when low power. For more details about LED indicator, please refer to “Power LED” on page 30. 3) The pwer LED of BY-WXLR8 Pro blinks red when mute on.
- Page 3 4. Line In IMPORTANT 1. The BY-WXLR8 Pro does not support external power supply. 2. Do not set the INPUT mold to MIC mold while the audio signal is being input from the audio mixer, etc., it may cause excessive audio input, resulting in distroted playback or recorded sound or damage to playback or recording equipment.
- Page 4 Cara Membaca Layar LCD CH-A-48 ① Channel Group (A/B） Long press “SET” botton to change Channel “A” or “B” ② Channel number (1-48) ③ Battery indication Mute On Press + & - to unlock LCD will be locked automatically in 30 seconds Long press bottoms “+”...
- Page 5 Memasang Baterai The transmitter is each powered by two AA batteries. To install batteries, please follow these steps: 1. Slide the battery cover to release the lock and open the battery compartment. 2. Insert two new AA batteries into the battery compartment by matching their polarities to the indications inside the compartment, and then close the cover.
- Page 6 Knurled ring Push the microphone or cable connector into the XLR audio input jack of the BY-WXLR8 Pro, then turn the knurled ring in a anticlockwise direction,gently tightening it so the microphone or XLR cable base is seated firmly in place.
Need help?
Do you have a question about the BY-WXLR8 Pro and is the answer not in the manual?
Questions and answers