Conceptronic SP1394C Quick Start Manual

External snapport firewire pc-card
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

NEDERLANDS
Hartelijk gefeliciteerd met de aanschaf van uw
In de bijgaande Snelstart handleiding wordt stap voor stap uitgelegd hoe u de
Conceptronic SP1394C installeert op uw Notebook of PC. Ingeval van problemen
adviseren wij u onze support-site te bezoeken (ga naar: www.conceptronic.net en
klik op 'support/2-Tech'). Hier vindt u hoogstwaarschijnlijk de oplossing voor uw
probleem.
Heeft u desondanks vragen met betrekking tot uw aankoop of heeft u support nodig
bij het aansluiten dan kunt u direct bellen met het Conceptronic supportnummer
Voor Nederland:
Voor België:
Om de gevraagde support te verlenen, hebben wij de volgende gegevens van u
nodig:
Duidelijke probleemomschrijving
Versienummer van de drivers die u gebruikt (controleer altijd de Conceptronic
website of u de laatste versie gebruikt).
Type Notebook of computer systeem dat u gebruikt.
Operating systeem dat u gebruikt.
Voor meer informatie over Conceptronic producten kunt u terecht op de
Conceptronic website:
mogelijk dat onderstaande installatie iets afwijkt van de installatie op uw computer.
Dit is afhankelijk van de Windows versie die u gebruikt.
1. Minimum systeemvereisten
! De minimum systeem vereisten gelden voor de installatie en functionaliteit van de
Firewire Cardbus PC Card. Het is mogelijk dat de genoemde systeemvereisten te
laag zijn voor bijvoorbeeld Video capturing doeleinden.
Pentium II 266 MHz
32 MB Ram (64 MB aanbevolen)
80 MB vrije ruimte op uw harde schijf
Conceptronic SP1394C
Snelstart handleiding
Conceptronic Snapport Firewire PC-Card.
0900-2024006 (€ 0,45 per minuut)
0902-41023
www.conceptronic.net
(€ 0,72 per minuut)
Bij software/drivers installatie: Het is
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP1394C and is the answer not in the manual?

Questions and answers

Summary of Contents for Conceptronic SP1394C

  • Page 1 Conceptronic Snapport Firewire PC-Card. In de bijgaande Snelstart handleiding wordt stap voor stap uitgelegd hoe u de Conceptronic SP1394C installeert op uw Notebook of PC. Ingeval van problemen adviseren wij u onze support-site te bezoeken (ga naar: www.conceptronic.net en klik op ‘support/2-Tech’). Hier vindt u hoogstwaarschijnlijk de oplossing voor uw probleem.
  • Page 2: Software Installatie

    NEDERLANDS • Cardbus PC Card slot • Een cd-rom station • Een monitor met een resolutie van 800 x 600, hoge kleuren/ware kleuren • Windows 98 SE / Windows 2000 / Windows ME / Windows XP 2. De kaart installeren In het pakket vindt u de volgende onderdelen: •...
  • Page 3 NEDERLANDS Controller.’ Klik op ‘Volgende’ (‘Next’). Windows vindt de Texas Instrument OHCI Compliant IEEE 1394 Host Controller. Klik op ‘Volgende’ (‘Next’). Waarschijnlijk vraagt Windows u de Windows cd-rom in uw computer te doen. Klik op ‘Volgende’ (‘Next’) . Volg de instructies en geef de locatie van de cd-rom op, bijvoorbeeld ‘D:\Win98’ als ‘D:’...
  • Page 4 NEDERLANDS 10. Om te controleren of de installatie gelukt is, gaat u naar: ‘Deze computer’ (‘My Computer’) – ‘Configuratiescherm ’ (‘Control Panel’) te - ‘Systeem’ (‘System’ - ‘Apparaatbeheer’ (‘Device Manager’). Als de ‘IEEE 1394 Bus host controllers / Texas Instruments OHCI Compliant IEEE 1394 PC Host Controller’ erbij staat, is de installatie gelukt.
  • Page 5 NEDERLANDS Om te controleren of de installatie gelukt is, gaat u naar ‘Deze computer’ (‘My Computer’) – ‘Configuratiescherm’ (‘Control Panel’) - ‘Systeem’ (‘System’) – ‘Hardware’ - ‘Apparaatbeheer’ (‘Device Manager’). Als de ’IEEE 1394 Bus host controllers / Texas Instruments OHCI Compliant IEEE 1394 PC Host Controller’ erbij staat, is de installatie gelukt.
  • Page 6 Het is mogelijk dat sommige camera’s problemen met de weergavekwaliteit geven. Als u last heeft van deze problemen, ga dan naar de Conceptronic website (http://www.conceptronic.net) en ga dan naar 2Tech voor informatie over nieuwe stuurprogramma’s. Voor andere informatie over Ulead Software kunt u de handleiding op de cd-rom raadplegen.
  • Page 7 NEDERLANDS stuurprogramma te gebruiken maar een nieuwere versie die u kunt downloaden op onze website. 6. Extern apparaat installeren Verbind het externe apparaat met de IEEE1394 kabel adapter, en verbind als dat nodig is het externe 1394 apparaat met een energiebron. Windows installeert het stuurprogramma automatisch.
  • Page 8: Minimum System Requirements

    The enclosed Hardware Installation Guide gives you a step by step explanation of how to install the Conceptronic SP1394C on your Notebook/PC. When problems occur, we advise you to go to our support-site (go to www.conceptronic.net and click ‘support/2-Tech’). Here you will find a lot of possibilities to solve your problems.
  • Page 9: Software Installation

    ENGLISH • One 6 pin – 4 pin 1394 cable • One license form with two serial numbers (for Ulead VideoStudio 4.0 SE). • Software CDROM with Ulead VideoStudio 4.0 SE 3. Hardware It is possible that you need an extra power adapter when a device needs more power than supplied by the Firewire PC Card.
  • Page 10 ENGLISH Windows will install the IEEE 1394 PC Card. After installation, the dialogue box “Windows has finished installing the software” will appear. Click “Finish” and reboot your laptop PC. Now the IEEE 1394 PC Card is ready to connect to an external IEEE 1394 device.
  • Page 11 ENGLISH 4.2 Installation under Windows 2000 and XP Start up your laptop PC and insert the IEEE 1394 PC card into the CardBus PCMCIA slot. Connect the IEEE 1394 cable to t h e PC card. Windows will automatically detect the card and install the IEEE 1394 PC card by itself. When the installation is completed, reboot your laptop PC to activate the driver.
  • Page 12 It is possible that some cameras give picture problems. When you have these problems, check the Conceptronic site www.conceptronic.net and choose the ‘2Tech’ option for an explanation of the new drivers.
  • Page 13 ENGLISH 5. Troubleshooting Windows 98/ 2000/ ME If you have picture problems under Ulead Software we strongly recommend you not to use the default driver but an update which is available at our website. 6. External device installation Connect external device to IEEE1394 cable adapter, and then connect the 1394 external device to a power source if necessary.
  • Page 14: Guía De Inicio Rápido

    Firewire SnapPort PC-Card . La Guía de instalación del hardware incluida le ofrece una explicación paso a paso de cómo instalar el Conceptronic SP1394C en su ordenador Notebook/PC. Caso de experimentar problemas, recomendamos acceda a nuestra página de soporte (acceda a www.conceptronic.net y haga clic en ‘support/2-Tech’).
  • Page 15: Instalación De Software

    ESPAÑOL • 32 MB de RAM (se recomiendan 64) • Ranura de tarjeta de PC para bus de tarjeta • Lector de CD-ROM • Windows 98SE / Windows 2000 / Windows XP / Windows ME 2. Para instalar la tarjeta El paquete debe contener lo siguiente: •...
  • Page 16 ESPAÑOL “Siguiente”. Windows busca el “Controlador actualizado (Recomendado)” de Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Haga clic en “Siguiente”. Windows Puede pedirle que introduzca el CD-ROM de Windows en la unidad seleccionada. Haga clic en “Aceptar”. Siga esta instrucción e introduzca la ubicación del CD-ROM, es decir, “D:\Win98”, suponiendo que “D:”...
  • Page 17 ESPAÑOL 10. Compruebe que la instalación se haya llevado a cabo correctamente: vaya a “Mi PC” – “Panel de control” – “Sistema” – “Administrador de dispositivos”. 4.2 Instalación en Windows 2000 y XP Inicie su ordenador portátil e introduzca la tarjeta de PC IEEE 1394 en la ranura PCMCIA para el bus de tarjeta.
  • Page 18 ESPAÑOL Ahora, la tarjeta de PC IEEE 1394 está lista para conectarse a un dispositivo IEEE 1394 externo. Compruebe que la instalación se haya llevado a cabo correctamente: vaya a “Mi PC” – “Configuración” - “Panel de control” – “Sistema” – “Hardware”...
  • Page 19 Es posible que algunas cámaras presenten problemas gráficos. Si se encuentra con estos problemas, consulte el sitio de Conceptronic - 19 -...
  • Page 20 ESPAÑOL (www.conceptronic.net) y seleccione la opción “2Tech” para una explicación de los nuevos controladores. Para más información sobre el programa Ulead, consulte el manual de Ulead que viene en el CD-ROM. Seleccione “Tutorial” o “Léame” para saber más sobre todas las aplicaciones del programa.

Table of Contents