Smart Wizard Status Bar - NETGEAR RangeMax WPN511 User Manual

NETGEAR RangeMax Wireless PC Card WPN511 User Manual

Smart Wizard Status Bar

Click the icon to open the Smart Wizard so you can view the status bar. The Smart Wizard
Settings page opens. The status bar is located at the bottom of the Settings page.
Wireless
network
Find a Network
Figure 1-7
The following table describes how to interpret the Smart Wizard status bar.
Understanding the Status Bar
Wireless network
Security
Channel
Throughput
Signal strength
Find a Network
Connection
status
1-8
Channel
Security
Connection status
Identifies which wireless network you have joined.
• Locked: security enabled.
• Unlocked: security not enabled.
The wireless channel used by the network. If many wireless networks in your
area use the same channel they can interfere with one another.
Wireless throughput measured in Mega bits per second.
More dots indicates a stronger signal. Usually, you will experience higher
throughput when the signal is strongest.
Click Find a Network to open the Connection Wizard.
Identifies the status of your network connection.
• Connected to Internet: Wireless Internet connection is OK.
• Connected to Router: Wireless connection to the router is OK but the router
is not connected to the Internet.
• 169.254.x.x or ___.___.___.___ : The wireless connection to the router is OK
but there is a problem with the router. See
v3.0, January 2007
Throughput
Signal
strength
Chapter 4, "Troubleshooting".