Summary of Contents for Tracer MSAT G2
- Page 1 MSAT G2 Handi-Remote Interface Installation Manual Version 2.20 Tracer Technology Systems, Inc. 350 S. Billings Blvd, Ste 2B Billings, Montana 59101 Product Number: 360-230-1000 Last Update: August 25, 2020 https://msatg2.com...
- Page 2 Page left blank Intentionally...
- Page 3 Limited Warranty COVERAGE: Tracer Technology Systems, Inc. warrants that its products will be free from defects in materials and workmanship for a period of 12 Months (1 years) from the date of shipment. During this time, Tracer Technology Systems, Inc. will cover parts, labor and return shipping. If failure is caused by instances other than manufacturing defects, Tracer Technology Systems, Inc.
- Page 4 Page left blank Intentionally...
- Page 5 All defective products will be accepted directly by Tracer Technology Systems, Inc. for credit, exchange, replacement, or repair at Tracer Technology Systems, Inc.’s discretion. After 30 days from invoice date, the manufacturer’s warranty applies.
- Page 6 Page left blank Intentionally...
-
Page 7: Table Of Contents
1.1 Overview..............1.2 Overview of the MSAT G2 Handi-Remote Interface...... -
Page 8: Introduction
1.0 Introduction 1.1 Overview The scope of this document is to aid in the installation of the MSAT G2 Handi-Remote interface. It is the goal of this document to address most of the questions an installer, and user might encounter. It is not the goal of this document to address every and all possible set-up combinations. -
Page 9: Overview Of The Msat G2 Handi-Remote Interface
Module 1 is the MSAT END An included 12" connection cable connects the MSAT G2 radio to the module. One end of the cable attaches to the MSAT-G2 End labeled Cable, and the other end attaches to the Handset End labeled Cable. -
Page 10: Section 2.0: Installation
MSAT G2 Handi-Remote Interface Installation Manual V2.00 Section 2.0: Installation 2.1 Introduction The installation of the G2-HR is easy and painless. The only problems that can be experienced is the extension cable between the two modules, plugging the cable into the incorrect connector, or no plugging the DC power supply required on the handset end. - Page 11 If the unit does not operate correctly, verify the connections. Installation Verification Once installed, the MSAT G2 Handset should power-up and the MSAT Logo should appear. If this does not occur, press and hold the Handsets power button located on the left side of the handset.
Need help?
Do you have a question about the MSAT G2 and is the answer not in the manual?
Questions and answers