Advertisement
Know Your Citrus Juicer
Lid
Assembled Cones
(Large Cone and Small Cone
Snapped Together, See
Figure 3)
Strainer
Juice Container
Spout
(UP for Closed/
DOWN for Open)
Spindle
Housing
Cord Wrap Storage
(Under Housing)
Actual product may differ slightly from images throughout this manual
5
Using Your Citrus Juicer
Place Housing on a level surface.
1
Insert Spindle into the receptacle on top
2
of the Housing then place Juice Container
over the Spindle, aligning the Spout with the
opening of the Housing (Figure 1).
3
Place the Strainer into the Juice Container
then fit the Strainer with the Cone(s).
Note: The Large Cone and Small Cone snap
together. The Small Cone can be used by
itself. In order to use the Large Cone, it
must be snapped together with the Small
Cone (Figure 3).
To juice into a cup or other suitable container,
4
place it under the Spout and ensure that
the Spout is in the DOWN (Open) position.
To juice directly into the Juice Container,
ensure that the Spout is in the UP (Closed)
position.
5
Plug the Citrus Juicer into the wall outlet.
6
Wash fruit to be juiced then slice it in half.
While holding the Housing with one hand,
7
use the other hand to press the center of the
cut side of the fruit onto the center of the
Cone to activate the Citrus Juicer.
8
The Citrus Juicer comes with an automatic
reversing motor to extract more juice from
the fruit. Simply stop applying pressure
when juicing, then press down a second time
to reverse the direction. Repeat as many
times as needed.
9
Release pressure to stop the juicing process.
Figure 1
Figure 2
To Use Large Cone,
Snap Together with
Small Cone
Figure 3
6
Advertisement
