Advertisement
3.
Place the battery pack completely into the bag
and fold the excess bag over the top of the
battery.
4.
Insert the bagged battery into the carton and
place the remaining large foam panel over the
top of the battery.
5.
Close the top flaps of carton and seal it using
the provided tape.
Important:
Center the tape over the butted
flaps, running it along the full length of the
top of the carton and extending it down both
vertical faces of the carton by a minimum
length of 7.6 cm (3 inches); refer to
Figure 2
1. Tape extending a minimum of 7.6 cm (3 inches).
6.
Affix the shipping labels to the dotted-line areas
as shown in
Important:
label if you are not shipping by air.
Figure
2.
1. Affix the class 9 label here. 3. International cargo
2. Affix the air-shipping label
here (only if the battery
is going to be shipped by
air).
g287104
2
Figure
3.
Do not affix the air-shipping
Figure 3
markings
g310403
Advertisement
