Related Manuals for Thonet Felix
Summary of Contents for Thonet Felix
- Page 1 Assembly Instructions 810 W Highway 25/70, Newport, TN 37821 866.319.9371 Email: thonet@mycfgroup.com Commercial Furniture Group Phone:423.623.0031 Fax:...
- Page 2 4 pcs. for (60") Bench x 4 pcs. for (60") Bench 1/4"-20 x 1" 5/16"- Flat Steel Washer 5/16"-18 x 2" Long Leveling Mounts Hex Head Bolt TOOLS REQUIRED 1/2" Open-End Wrench or Ratchet Wrench With 1/2" Socket FELIX PAGE: 2...
- Page 3 UPHOLSTERED COMPONENTS WOODEN LEGS SB1 x 1 pc. WL1 x 4 pc. ST1 x 1 pc. FELIX PAGE: 3...
- Page 4 1. Turn ST1 bottom side up and open the velcro strip to gain access to the interior framing. 2. Once you have access into the interior framing align the holes in ST1 with the holes located in SB1. FELIX PAGE: 4...
- Page 5 2. Take the assembled bolt and washer and slide it through one of the holes in ST1 and into the threaded insert in SB1. See DIAGRAM 2-A above. 3. Hand tighten the bolt and repeat this step for the remaining bolts. DO NOT securely tighten the bolts in this step. FELIX PAGE: 5...
- Page 6 Use caution to NOT overtighten the bolts. 3. After the bolts are securely tightened you may now reattach the velcro strip on the bottom of the seat to close off the bottom of the seat. Your bench should resemble DIAGRAM 3-A above. FELIX PAGE: 6...
- Page 7 3. Once the wooden legs WL1 and H3 leveling mounts have been installed and adjusted, your bench should resemble DIAGRAM 4-A above. 4. This completes the assembly of your new bench and is now ready to be used. FELIX PAGE: 7...
Need help?
Do you have a question about the Felix and is the answer not in the manual?
Questions and answers