NETGEAR GA311 User Manual page 44

User Manual for the NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311
Install the driver for the NETGEAR 10/100/
1000 Mbps Gigabit Ethernet Adapter
GA311.
The Locate Driver Files dialog box
a.
appears.
Select Specify a location. Click Next.
b.
Insert the GA311 driver CD into your
c.
CD-ROM drive. In the Copy
manufacturers files from field, type D:\
and click OK.
Note: Windows drivers are found at D:\,
assuming that D: is the drive letter for
the CD-ROM drive.
The Driver File Search Results dialog
d.
box appears. Click Next.
The Completing the Found New
e.
Hardware Wizard dialog box appears
with the following adapter name:
NETGEAR 10/100/1000 Mbps Gigabit
Ethernet Adapter GA311. Click Finish.
Remove the GA311 driver CD from the
f.
CD-ROM drive. The GA311 Windows
driver installation is complete.
You should see the Local Area
Connection icon on the right in the lower
right portion of the Windows task bar.
B-6
Locate Driver Files
Note: If Windows warns about a Digital
Signature Not Found, click Yes to continue.
Local Area Connection Icon before you connect a
network cable
Manual Driver Installation