Start Here Instructions in this guide are for users of Windows Model FA510 Network Card. For instructions on installing and verifying the Windows network driver, refer to “Install the Windows Network Driver” on the other side of this guide. These four easy steps provide information for installing your Model FA510 Network Card: 1.
Install the Network Card The Model FA510 Network Card is hot swappable, which means it can be inserted into a PC that is either turned off or powered on. 1. Insert the Model FA510 Network Card into the CardBus slot as illustrated in the ﬁgure.
Note: One of the ports on NETGEAR hubs is switchable between Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push button. If you are using this switchable port on a NETGEAR hub to connect to a PC or the network card, make sure the Normal/Uplink push button is set to Normal.
Before you proceed with the installation steps, decide on a name for your network and for each PC (each name must be only one word). You also need to have the Windows CD-ROM and the FA510 Drivers and Diagnostics Disk ready to use in the installation process.
Select “Specify a Location” and make sure the location is “A:\.” Insert the Drivers and Diagnostics Disk into the ﬂoppy drive, and click on “Next.” Model FA510 Network Card Installation Guide N e x t > C a n c e l B r o w s e .
Make sure that the location and the correct driver are displayed (for example, A:\NETFA510.INF). Click on “Next.” Insert Disk Please insert the the disk labeled 'NETGEAR FA510 Fast Ethernet CardBus Card Drivers Disk' and click OK. Click on “OK.” Model FA510 Network Card Installation Guide View List...
Copying Files... The file 'NDIS2DOS\FA510.DOS' on NETGEAR FA510 Fast Ethernet CardBus Card Drivers disk cannot be found. Insert NETGEAR FA510 Fast Ethernet CardBus Card Drivers disk in the selected drive, and click OK. Copy files from: Insert the Drivers and Diagnostics Disk and click on “OK.”...
Update Device Driver Wizard NETGEAR FA510 Fast Ethernet CardBus Card Windows has finished installing the software that your new hardware device requires. < Back Click on “Finish.” Network To finish setting up your new hardware, you must restart your computer.
Verify Installation Double-click on “My Computer” on your desktop, double-click on “Control Panel,” and then double-click on “System.” Click on “Device Manager.” Model FA510 Network Card Installation Guide...
“NETGEAR FA510 Fast Ethernet CardBus Card.” If there is a problem with the installation of the driver, an exclamation point appears next to “NETGEAR FA510 Fast Ethernet PCI Adapter.” If there is an exclamation point, double-click on “NETGEAR FA510 Fast Ethernet PCI Adapter.”...
The “Properties” window opens, and a message regarding the status of the device is displayed in the window. Continue to click on “OK” or click on the “X” in the right-hand corner to close any open windows and return to the Windows 98 desktop. Model FA510 Network Card Installation Guide...
10% to 90% noncondensing Agency Compliance CE mark, commercial FCC, Part 15, Class B EN 55 022 (CISPR 22), Class B Canada ICES-003, Class B VCCI Class B Model FA510 Network Card Installation Guide ® ® Windows 95, Windows 98, Windows NT compatible...
Consult the dealer or an experienced radio/TV technician for help. EN 55 022 Statement This is to certify that the Model FA510 Network Card is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a.
NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 Phone: 1-888-NETGEAR E-mail: support@NETGEAR.com www.NETGEAR.com *M-FA510NA-1* Model FA510 Network Card Installation Guide...