BIOSENCY BORA Band BB-100 Quick User Manual

In order to support you when you return home, we have set up remote monitoring of your cardio-
respiratory parameters.
As part of this remote monitoring, you have been provided with a
bracelet, as well as a
document explains how these devices work as well as advice for how to get the best out of them.

Advice for wearing the bracelet

The BORA Band BB-100 should fit snugly on your wrist to ensure measurement accuracy.
However, you should not feel any discomfort. It must be worn at all times, but should be removed
when showering/washing. During this time, we advise you to put it on charge.

Starting up

Press the button for 1 second. The indicator light
BORA Band BB100 is working.

Making sure your BORA Band is working correctly

Press the button for 1 second. The indicator light
BORA Band BB100 is on.

Turning off

To turn off, press the button until the indicator light flashes
that your BORA Band BB100 is stopping.

Charging

Use the charger provided by Biosency to charge your BORA Band. We strongly recommend that
you charge it during those times when you are showering/washing. Don't forget to put it back
on once charged.

Other indicator lights

Flashing orange light: the battery is low on
charge; please charge you BORA Band
BB100 using the charger provided.
Flashing white light: the battery is charging.
Once completely charged, this indicator light
will switch off.
BORA-BOX_QUG_PATIENT_EN_1.0 - Date: 2021/01/03
QUICK USER GUIDE
BORA Box to run the BORA Connect for Home mobile
USB Port
Case
Indicator light
Button
Bracelet
BORA Band BB-100 connected
is static for 5 seconds and tells you that your
is static for 5 seconds and tells you that your
for 5 seconds. This means
Blue: The BORA Band is sending or receiving
data; please do not turn off during this time.
Fixed red indicator light: your BORA Band
BB100 is faulty. Please try switching off and
then on again. If there is still a fault, please
contact your provider.
application. This
2797