Sycreader X Series Quick Setup Manual

2D scanning platform
Quick Setup Guide
Series X (1000)
1. Factory reset
Note: Please use the "Factory Reset" function
with caution, after reading this setting code,
the current parameter settings will be lost
and replaced by the factory default values.
Factory reset
2. Communication interface
The 2D barcode scanning platform provides
USB keyboard interface, USB-COM virtual
serial communication interface to
communicate with the host. Through the
communication interface, you can receive
reading data and change the functional
parameters of the QR code scanning
platform.
** USB-KBW
USB-COM
3. Symbol switch
Long press the top button for 5 seconds, you
can turn on/off QR code reading, choose
whether to recognize the QR code according
to your needs in a specific scenario, prompt
sound two tones to indicate that QR code
reading is on, prompt sound one tone means
that QR code reading is closed, can only read
1D code.
4. Tone settings
Click the top button to set different
frequencies of tones, a total of four styles of
tones and mute mode, click the button to
switch between these modes.
5. Reading mode settings
** Induction mode
Continuous mode