Advertisement
Set up your Optus Ultra
WiFi Booster Gen 2
1. How to pair your booster
Ensure both booster and modem are within 2 meters of each other
1
and powered up. Check the booster power LED is solid green and the
Mesh LED is flashing red.
Push and hold the pairing button on the rear of the booster for approx
2
6 sec , then release. The Mesh LED should flash green.
On the Optus modem press the paring button for approx 3 seconds
3
then release. Check the WiFi LED is flashing green.
Within 3 minutes the Mesh LED will go solid green, this indicates the
4
booster and modem have successfully paired. On the modem, the
WiFi LED will revert to solid green.
You can now relocate the booster unit in an area within the house
that you want to boost your WiFi signal.
Modem
Pairing button and
WiFi button at the
back
Within 2m
Pairing button
Booster
at the back
Advertisement
