About This Product; 1-1.Specification; 1-2.Feature Of This Product - NEC N8804-005 User Manual

2-channel 1000base-t kit
Table of Contents

Advertisement

1.About this product

1-1.Specification

LAN agreement standard
PCI bus
External dimensions
Weight
Voltage
Environmental
requirements

1-2.Feature of this product

The N8804-005 1000BASE-T(2ch) board kit is LAN board only for the NEC Express5800/ft series.
Important
Item
IEEE802.3ab
64bit, 133MHz PCI-X
122mm(w)×170mm(d)×22mm(h)
0.1kg
PCI 5V/3.3V
Temperature
In operation
Humidity
Temperature
In storage
Humidity
Please mount on the PCI card slot for PCI-X as much as possible and use this
product to draw out the performance of this product enough because this product
is PCI-X 133MHz correspondence.
This one product can install one PCI bus.
The number of sheets equipped with the maximum for system is different
according to the main body device, and refer to the system configuration guide
of the main body device, please.
It comes equipped with two pieces per one Peripheral Component Interconnect
bus only when the AFT function is used.
Please note the following points when you use the Teaming function and the
Ethernet function with this product.
・ Please connect it with same LAN with the same network equipment when you
use the ALB/GEC/FEC function.
・ Please connect it with same LAN when you use the AFT function.
・ A couple of two team can be set, and this adaptor be set up to one team
in the maximum in the AFT/ALB/GEC/FEC function.
Specification
0 to 45℃
5 to 95%
-40 ~ 70℃
5 ~ 95%
- 28 -
Remarks
non-condensing

Advertisement

Table of Contents
loading

Table of Contents