Opticlar VisionMed P2 Mini Pro Quick Start Manual

The Otoscope head is easily fitted The 3X magnification viewing lens
or removed from the battery handle can swivel left or right to allow
by simple thread mechanism. access through the head for fine
instrument removal of foreign
The single-use Speculums fit by
objects from the ear.
twisting in a clockwise direction.
The port for attaching the optional
The LED is accessed by removing
insufflation adapter and bulb is
the handle for replacement.
shown extruding from the head on
the right.
To replace batteries, unscrew
end cap and insert batteries
positive end up.
On/Off switch on pocket clip
YOUR OPTICLAR DEALER IS:
OPTICLAR is a brand and trademark owned and manufactured exclusively
for Albert Waeschle Ltd, one of the UK's oldest medical and
surgical wholesaler's and the OPTICLAR range is available through
the medical and surgical trade.
Albert Waeschle LTD
Unit 11 Balena Close, Poole, Dorset UK.
Tel: 01202 601177 Fax: 01202 650022
Applicable Standards: CE - complies with European medical devices directive 93/42/EEC.
DIN EN ISO 7376. Complying with EN60601-1, EN60601-1-2
Electrical Compliance: Complying with EN60601-1, EN60601-1-2
Protection Class II - Internal Electrical Power Source
Statutory Regulations: In accordance with local regulations this product
should be disposed of as an electronic device seperately. Applied part BF.
WEEE producer: Albert Waeschle Ltd. WEEE reg no. wee/dk0067tx
Do not open the instrument or battery handle in the vicinity of the patient
P2 Mini Pro FO Otoscope
Green LED
technology