Using Your Toaster - Sunbeam Everyday ETA500 User Manual

Using your Toaster

Plug the toaster into a 230-240 volt AC
power outlet and switch the power on.
1. Position the bread into the bread slot.
2. Select the desired colour setting on the
Browning Control Dial.
Note: For the first time you toast, set the dial
mid way to 4 and adjust as desired for future
toasting.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as they
may catch fire.
3. Push the Lever handle down to commence
the toasting cycle.
4. When the colour setting is achieved, the
toaster will automatically turn off and pop
the toast up. If you need to remove the
toast before the cycle is complete, then
press the CANCEL button. The CANCEL
button will immediately interrupt the
toasting cycle and pop the toast up.
5. To remove small pieces of toast or bagels,
use the High Lift Lever to lift the toast
above the starting position. This will
prevent burning your fingers as you remove
the toast.
3
6. The REHEAT setting is for reheating toast/
bread without further browning. To use
this feature, place the bread/toast to be
reheated in the slots, push down the
toasting lever until it clicks, then press the
REHEAT button.
7. To toast frozen bread, place your bread
into the slot, select the desired browning
level and push the DEFROST button. This
setting extends the toasting time to allow
for the defrosting of the bread before
toasting.
8. When toasting muffins or bagels ensure
they are cut into even halves and fit freely
into the bread slot. Do not force them
into the toaster. If your bread jams in
the toaster, always switch the power off,
remove the plug and ease the bread out of
the toaster.
WARNING: Never attempt to extract jammed
toast, muffins, bagels or crumpets with
a knife or any other metal object, as
contact with the live element may cause
electrocution.