Page 2
chnical Specification Installation Steps Step 1-A: Install Support Brackets into Solid Concrete or Masonry Walls Holds up to 6 Bikes Weight Capacity 90KG Determine your desired wall that you want to install Drill holes with power drill at the Dimensions 1300mm x 280mm x 142mm marked positions.
Page 3
Step 1-B: Install Support Brackets into Timber Wall Studs Step 2: Preassemble Square Tube Pass the square tube through the left support bracket first, feeding through middle and then finally right ill holes with power drill at the Determine your desired wall that you want to install bike hand support bracket.
Page 4
Step 4: Install Limit Screws To Complete Installation Ensure that the limit screws holes on the square tube are positioned either side of the left support bracket. Use the Allen key (E) provided to screw bolts (D) into the square tube to complete bike rack assembly.