Configuring Genlock - Sencore Impulse 400D User Manual

4.2.16

Configuring Genlock

This menu allows the user to configure the genlock reference used by the IMPULSE
400D. The IMPULSE 400D can be configured to use an external user provided
reference or disabled completely.
Setting
Reference Source
Vertical (Lines)
Horizontal (Pixels)
Note: The Genlock reference connector if enabled requires external termination.
Page 47 (87)
Impulse 400D – User Manual
Genlock options
Range
Disabled
External
-312 - 312
-431 - 432
Description
Setting to Disabled will synchronize video
output to the PCR carried in the transport
stream. Setting to External uses the user
provided external genlock reference.
Plus or minus half of the number of lines in
the genlock reference.
Plus or minus half of the number of pixels in
the genlock reference.