UDIZINE SW196SP Assembly Instructions

SlatStrip
Shelf Type Thickness
1/4"
Tempered
5/16"
Glass
3/8"
MDF 3/4"
Hanging Bar
The maximum weight load is based on an evenly distributed weight load between 2 points
The maximum weight load for regular glass is approximately 1/4 of tempered glass
Please Note:
For mounting on sheet rock/drywall, we recommend using 3/16" Molly Bolts
or Toggle Bolts. Tools and mounting hardware are not provided
Toggle Bolts Molly Bolts
General Note:
display. It is recommended to consult with a professional and determine the appropriate fastener/anchor needed for the mounting surface. UDIZINE is solely responsible
for the quality of its products and not accountable for faulty installation and ill use of its products beyond recommended limitations. WWW.UDIZINE.COM
SW196SP
SW1107SP
2"
2 3/4"
Maximum Weight Load (lbs)
L - Shelf/Bar Width
24" 36"
Distance Between Supports (Ls)
20" 22" 22" 24" 32"
42 22
70 66 66 66 38
80* 85
30 40 40 40 18
77 120 60
It is the responsibility of the purchaser and/or installer to verify that the mounting surface is solid and capable of supporting the intended weight of
Metal SlatStrip Metal SlatStrip
Item #: SW196SP
Length: 47"
# of Slits:
17
Max Weigh Load*
260lbs
Per Strip:
88lbs
Per Slit:
22"
48"
22" 24" 36"
22
99 44 38
85
50 25 18
31 66
Phillips Screw Driver
Assembly Instructions
SW1107SP
91"
*The weight refers to the
SlatStrip's ability to support
32
a certain weight load. The
final result depends on
the type of wall, anchor,
520lbs
hardware and installation.
88lbs
22"
Shelf
Hanging Rail
44"
Recommended Hardware
Screwdriver
Page 1 of 3
24"
44"
Level