SAFECONTROL Touch-79W-A6 Installation Manual

Mounting
The panel can be used for surface and fl ush mounting.
Prepare a hole in the wall measuring 157 x 102 mm
for fl ush mounting.
157 mm
1
1
1 1
2
Connect the data cable
and power supply accor-
ding to the wiring diagram
and place the touch panel
in the holder.
Secure the panel against
removal with the screws
at the bottom.
Connection
Connect the data cable. Power supply can be done
1
via a data cable using PoE 802.3 af technology.
2
1
2
If PoE technology is not avai-
lable, the touch panel can be
powered using the included.
1
Screw the
metal insta-
llation frame
into the hole
in the wall.
2x
2
2
Installation guide
Touch-79W-A6
Touch-79B-A6
1
SAFECONTROL s. r. o.
Vaníčkova 315/7
169 00 Praha 6
IČO: 02084287
DIČ: CZ02084287
support@safecontrol.cz
www.safecontrol.cz
Information for users on the disposal of electrical and electronic equipment
(corporate and enterprise use)
For proper disposal of electrical and electronic equipment, request detailed
information from your dealer or suppliers.
Information for users on the disposal of electrical and electronic equipment
in other countries outside the European Union
The below symbol is only valid in the countries of the European Union. For proper
disposal of electrical and For detailed information, contact your local authorities
or equipment retailer.
Made in Czech Republic