Advertisement
Quick Links
Mounting
4x
315 mm
1
1
Prepare a hole of size
315 x 212 mm.
2
2
3
3
Connection
Connect the power supply to the
1
panel using the supplied DC connector.
2
1
Connect the Ethernet cable
2
to ETH port.
4x
Secure the panel with screws
and struts.
Panel with a sheet thickness
of max. 2.5 mm.
1
Installation guide
Touch-121-L
WEBserver-20-HMI-12
SAFECONTROL s. r. o.
Vaníčkova 315/7
169 00 Praha 6
IČO: 02084287
DIČ: CZ02084287
support@safecontrol.cz
www.safecontrol.cz
Information for users on the disposal of electrical and electronic equipment
(corporate and enterprise use)
For proper disposal of electrical and electronic equipment, request detailed
information from your dealer or suppliers.
Information for users on the disposal of electrical and electronic equipment
in other countries outside the European Union
The below symbol is only valid in the countries of the European Union. For proper
disposal of electrical and For detailed information, contact your local authorities
or equipment retailer.
Made in Czech Republic
Advertisement
Related Manuals for SAFECONTROL Touch-121-L
Summary of Contents for SAFECONTROL Touch-121-L
- Page 1 Panel with a sheet thickness of max. 2.5 mm. Touch-121-L WEBserver-20-HMI-12 Connection SAFECONTROL s. r. o. Connect the power supply to the Vaníčkova 315/7 panel using the supplied DC connector. 169 00 Praha 6 IČO: 02084287 DIČ: CZ02084287 support@safecontrol.cz...
- Page 2 Select http or https according to SA VE the server. If you use it in conjunction with To connect via WiFi. the SAFECONTROL WEBserver, write after the address/display for registration Go to the Hardware settings section. to automatically log in.